1) Cr50 alloy powder
Cr50合金粉
1.
A new type Cr50 alloy powder was developed in this paper.
研制了一种新型Cr50合金粉末,分析了Cr50合金粉末对5CrMnMo钢喷涂后涂层的金相组织、组成相、性能和耐磨性。
2) alloy powder
合金粉
1.
Iron-Based alloy powder of plasma arc surfacing for valve seal surface;
阀门密封面用等离子弧堆焊铁基合金粉末
2.
Effect of alloy powder on microstructures and mechanical properties of the K640 brazed joints;
合金粉对K640钎缝组织及性能的影响
3.
Preparation and properties of Al flakes and Al/Mg alloy powder
片状Al及Al//Mg合金粉的制备及性能
3) alloy powder
合金粉末
1.
Study on niobium-cobalt-rare earths alloy powder and its applications;
稀土铌钴合金粉末材料研究与应用
2.
Investigation on iron-nickel-rare earths self-fluxing alloy powder and its applications;
铁镍稀土自熔性合金粉末研究与应用
3.
Nanocrystalline Fe-Si alloy powders were prepared by high energy ball milling.
通过高能球磨法制备Fe75Si25纳米晶合金粉末,研究了高能球磨下的反应进程及产物,并讨论了合金粉末的微观结构和磁性能。
4) alloy powders
合金粉末
1.
The alloy powders of NiCrBSiWCe were flame sprayed on a 45 carbon steel substrate.
采用热喷熔方法在45钢表面制备了NiCrBSiWCe合金粉末喷熔层,在SRV磨损试验机上进行小振幅滑动磨损试验研究。
5) alloy Zinc powder
合金锌粉
1.
Basing on the test of different size Zinc powder and the comparative test of blown Zinc powder and alloy Zinc powder,the results have shown that using Pb-Sb-Zn alloy Zinc powder is beneficial to decrease the consumption of Zinc powder purification process.
对硫酸锌溶液净化过程中锌粉置换钴的机理进行了热力学和动力学研究,通过不同粒度的锌粉、自产锌粉和合金锌粉的对比试验,结果表明:使用Pb-Sb-Zn合金锌粉有利于降低净化过程的锌粉消耗,现已应用于生产实践,降低了生产成本。
2.
In this article, the way of metal electrodeposition was adopted to prepare alloy zinc powder.
本文采用金属电结晶沉积的方法，制备合金锌粉，同时又对合金锌粉进行表面改性，并在碱性电解液中添加多组份有机添加剂的方法改善电极的性能。
6) prealloyed powder
预合金粉
1.
Preparation of prealloyed powder for diamond tools by coprecipitation-thermal decomposition method;
共沉淀-热分解法制备金刚石工具用预合金粉
2.
Preparation and granularity control of Fe-Co-Cu prealloyed powder;
金刚石制品用Fe-Co-Cu预合金粉末的制备及其粒度控制
3.
Preparation of prealloyed powder for matrix of diamond tools;
金刚石制品胎体用预合金粉的制备
补充资料：镍铝铁铬合金粉
分子式：暂无
分子量：暂无
CAS号：暂无
性质：暂无
制备方法：暂无
用途：暂无
分子量：暂无
CAS号：暂无
性质：暂无
制备方法：暂无
用途：暂无
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条