1) super high molecular weight
超高分子量
1.
Synthesis of super high molecular weight Co-polymer of AM/AA/AMPS and its salt by inverse suspension polymerization;
反相悬浮法合成超高分子量AM/AA/AMPS及盐的共聚物
2.
Synthesis of super high molecular weight sodium polyacrylate by inverse suspension polymerization;
反相悬浮聚合法合成超高分子量聚丙烯酸钠
3.
The installation and application of super high molecular weight polytene lining plate in the inclined plane of ground coal bin are introduced.
介绍了井底煤仓溜煤斜面采用超高分子量聚乙烯衬板安装及应用情况 ,对井底煤仓棚煤原因及解决办法进行了探
2) Ultra high molecular weight
超高分子量
1.
Ultra high molecular weight polystyrene with Mw = 68.
0×10~5以上,形成超高分子量聚苯乙烯(UHMW PS)。
2.
In this research work, synthesis and application of the poly (long chain α-olefin) with ultra high molecular weight, the copolymerization of long chain a-olefin and divinylbenzene (DVB) and the grafting copolymerization of homopoly(long chain α-olefin) and maleic anhydride by solution polymerization were studied.
本论文主要研究了超高分子量聚长链α-烯烃的合成,长链α-烯烃与二乙烯基苯共聚以及长链α-烯烃均聚物溶液接枝马来酸酐,并探讨了聚合物合成规律以及用途。
3) superhigh molecular weight
超高分子量
1.
The copolymerization of acrylamidesodium acrylate initiated by a new combined redox system was studied, and superhigh molecular weight (2.
2× 1 0 7的超高分子量聚丙烯酰胺。
4) ultra-high molecular weight polyethylene
超高分子量聚乙烯
1.
Preparations and characterizations of high density polyethylene/ultra-high molecular weight polyethylene composite;
自增强高密度聚乙烯/超高分子量聚乙烯复合材料制备与表征
2.
Application and modification research progress of ultra-high molecular weight polyethylene;
超高分子量聚乙烯的应用及改性研究进展
3.
Moulding processing and modifying of ultra-high molecular weight polyethylene;
超高分子量聚乙烯成型加工及改性
5) UHMWPE
超高分子量聚乙烯
1.
Research on Gas-assisted Extrusion Technology of UHMWPE;
超高分子量聚乙烯气辅挤出工艺探索
2.
The Research in UHMWPE Single Screw Extruding Process Theory;
超高分子量聚乙烯单螺杆挤出压力形成理论
3.
Friction and Wear Properties of Polypropylene,Carbon Black,Carbon Fiber Filled UHMWPE Composite;
聚丙烯、炭黑和碳纤维共混填充超高分子量聚乙烯复合材料的力学和摩擦磨损性能
6) ultra high molecular weight polyethylene(UHMWPE)
超高分子量聚乙烯(UHMWPE)
补充资料:超高分子量聚氯乙烯
分子式:
CAS号:
性质:又称超高分子量聚氯乙烯。指平均聚合度1700以上,工业产品2000~4500,有时可高达8000的一类聚氯乙烯树脂。由于分子量高,大分子链间缠结点增多,类似交联效应,因而塑性变形降低,回弹性增加,耐热、耐寒、耐疲劳、机械强度都有提高,使用温度范围宽。可采用悬浮法,本体法,乳液法或微悬浮法等工艺,在较低温度及链增长剂存在下,以高活性引发剂使氯乙烯聚合而制得。加入增塑剂后用于制备PVC热塑性弹性体,替代橡胶用作汽车内饰件,门窗密封条,耐热电缆护套,耐热软管及鞋底等。
CAS号:
性质:又称超高分子量聚氯乙烯。指平均聚合度1700以上,工业产品2000~4500,有时可高达8000的一类聚氯乙烯树脂。由于分子量高,大分子链间缠结点增多,类似交联效应,因而塑性变形降低,回弹性增加,耐热、耐寒、耐疲劳、机械强度都有提高,使用温度范围宽。可采用悬浮法,本体法,乳液法或微悬浮法等工艺,在较低温度及链增长剂存在下,以高活性引发剂使氯乙烯聚合而制得。加入增塑剂后用于制备PVC热塑性弹性体,替代橡胶用作汽车内饰件,门窗密封条,耐热电缆护套,耐热软管及鞋底等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条