1) furnace foundation temperature
炉基温度
2) temperature of low-oven
低温炉温度
1.
The influence to mechanical properties of carbon fiber made by preoxidation retention time、temperature of low-oven and exhaust emission;
预氧化停留时间及低温炉温度废气排放对碳纤维性能的影响
3) charging temperature
装炉温度
1.
Controlling the hot charging temperature accurately has a very important significance for optimizing heating control.
根据某公司现场的实际生产情况,利用已建立的“连铸坯凝固过程传热数学模型”开发了“铸坯装炉温度在线实时计算模型”,并将其成功地应用在某公司连续加热炉计算机控制中,与传统的经验模型相比所开发的数学模型具有计算速度快、计算精度高等特点,为实施炉内铸坯温度的在线跟踪提供了准确的初始条件。
2.
With the steelmaking-casting-direct rolling process and charging furnace at room temperature in laboratory,the influence of different charging temperature on the microstructure and properties of X70 pipeline steel were researched.
采用实验室钢坯室温装炉和炼钢-连铸-直接轧制的不同方法,研究了用钢坯室温装炉工艺和连铸连轧工艺生产X70管线钢时,不同的装炉温度对成品组织性能的影响。
4) dry dust removal
炉顶温度
1.
Because of the requirement of dry dust removal system hop-pocket pair for the temperature of raw gas intake case body is exactitude,and owing to equipment failure or blast furnace conditions fluctuation and others factor met wrought furnace top temperature on the high or on the low side,the dry dust removal system was impacted failure-free operation.
由于干法除尘布袋对进入箱体的荒煤气温度要求严格,而设备故障或高炉炉况波动等因素都会造成炉顶温度偏高或偏低,影响干法除尘正常运行。
5) end flue temperature
炉头温度
1.
Reducing the regenerator' s heat resistance to increase the end flue temperature of No. 3 coke oven;
降低3~#焦炉蓄热室阻力 提高炉头温度
6) temperature of smelting furnace
熔炉温度
1.
Through a combination of upper and lower engines, the electrode current in the smelting process is controlled to achieve the purpose of controlling the temperature of smelting furnace.
对铅锌矿冶炼厂生产作业进行自动化技术改造,通过上位机与下位机的有机结合,对精矿冶炼过程中的电极电流进行控制,实现熔炉温度控制,解决了传统手法可测不可控的难题。
补充资料：铂电阻温度表(见电阻温度表)
铂电阻温度表(见电阻温度表)
表。bod旧nZu wendubiao铂电阻温度表见电阻温
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条