1) membrane separation activated sludge process
膜分离活性污泥法
1.
Based on the actual application to wastewater treatment in food industry, this paper states the characteristics of membrane separation activated sludge process, such as high load activated sludge, stable effluent quality, quick biochemical reaction velocity, small occupation area and simple maintenance management.
以处理食品加工厂的生产废水为例,介绍了膜分离活性污泥法的特点:污泥负荷大、出水水质稳定、生化反应速率快、占地面积少、维护管理简便等;同时还介绍了中空纤维膜的维护管理方法。
2) activated sludge process
活性污泥法
1.
Genetic algorithms for multivariable optimal control of activated sludge process;
活性污泥法多变量最优控制的遗传算法
2.
Treatment of wastewater from different enterprises by biological iron strengthening activated sludge process;
生物铁强化活性污泥法处理不同性质企业联片废水
3.
Technological improvement of activated sludge process used for treatment of wastewater from a monosodium glutamate factory;
活性污泥法处理味精厂废水的工艺优化
3) activated sludge method
活性污泥法
1.
This paper summarizes the development of modeling a nd simulation technology of activated sludge method on wastewater treatment proc ess.
综述了活性污泥法污水处理过程的建模及仿真技术的发展 。
2.
Absorption activated sludge method is efficient for sludge treatment.
吸附活性污泥法是一种高效率的污水处理方法，曝气池停留时间约４０ｍｉｎ，ＣＯＤ、ＢＯＤ５和ＳＳ的去除率可达到６０％～７０％。
3.
In the wastewater treatment processes, the activated sludge method is a mostly useful method.
活性污泥法是当前最常用的一种污水处理方法，国际水协会(IWA)针对活性污泥法提出了ASM系列机理模型。
4) active sludge method
活性污泥法
1.
The active sludge method was used to treat the wastewater by analyzing the characteristics of organic wastewater produced through refining process in oil plant.
针对油脂精炼厂在精炼过程中产生的有机废水的特点,采用了活性污泥法的处理工艺。
5) Activated sludge
活性污泥法
1.
Analysis of flow patterns of activated sludge process in wastewater treatment;
污水处理活性污泥法流态分析
2.
Study on acclimating and filtrating the aerobic denitrifying bacteria from activated sludge;
活性污泥法驯化筛选好氧反硝化菌的试验研究
3.
Operational qarameters to keep high nitrification rate in activated sludge process under low temperature;
活性污泥法低温硝化及其运行控制条件研究
6) active sludge process
活性污泥法
1.
Modification of active sludge process by adding hydrophilic suspending plastic filler;
活性污泥法污水处理应用亲水性填料实验研究
2.
This paper analyzes on three problems probably occur in the operation and management of the sewage treatment plant with the active sludge process,expounds the inherent causes of these problems,and puts forward some concrete technical measures for solving these problems.
分析了活性污泥法污水处理厂运行管理中可能出现的3个主要问题,并阐述了产生这些问题的内在原因,提出了解决这些问题的具体技术对策。
3.
This paper introduced the treating process and features in wastewater treatment plant, Guangzhou Economical Development District, discussed the effective monitoring on the industrial district wastewater treatment by active sludge process from the theoretic and practical point of view.
介绍了广州开发区污水处理厂的工艺流程、水质特点,针对该厂的情况,从理论和实践上对活性污泥法在处理工业区污水中如何进行有效运行调控问题作了比较深入的探讨。
补充资料：传统活性污泥法
分子式：
CAS号：
性质：又称普通活性污泥法。经初次沉淀后的废水与由二次沉淀池来的回流污泥在曝气池起端进入池内，通过扩散或机械曝气进行充分混合与曝气，并通过活性污泥的吸附、絮凝和氧化作用去除废水中的有机物。从曝气池流出的混合液在二次沉淀池沉淀后，沉淀出的活性污泥以进水量的25%～50%返回曝气池(即污泥回流比为25%～50%)。该法适用于处理要求高而水质较稳定的废水。其生化需氧量的去除率可达85%～95%。传氧 oxygen transfer 指(1)气相和液相之间氧的交换。(2)液体吸收的氧量与用曝气方式或充氧设备向该液体输送氧量的对比率；一般以百分率表示。
CAS号：
性质：又称普通活性污泥法。经初次沉淀后的废水与由二次沉淀池来的回流污泥在曝气池起端进入池内，通过扩散或机械曝气进行充分混合与曝气，并通过活性污泥的吸附、絮凝和氧化作用去除废水中的有机物。从曝气池流出的混合液在二次沉淀池沉淀后，沉淀出的活性污泥以进水量的25%～50%返回曝气池(即污泥回流比为25%～50%)。该法适用于处理要求高而水质较稳定的废水。其生化需氧量的去除率可达85%～95%。传氧 oxygen transfer 指(1)气相和液相之间氧的交换。(2)液体吸收的氧量与用曝气方式或充氧设备向该液体输送氧量的对比率；一般以百分率表示。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条