1) low-cycle impact fatigue
低周冲击疲劳
1.
A study has been performed on micromechanisms of cyclic deformation and fatigue damage in pure Zinc and TC4 Titanium alloy under low-cycle impact fatigue (LCIF) loading.
研究了六方金属纯锌和TC4钛合金在低周冲击疲劳载荷下的循环变形和损伤机制。
2) low cycle impact fatigue
低周冲击疲劳
1.
A study has been performed relating to the micromechanisms of cyclic deformation in polycrystalline copper and aluminium under low cycle impact fatigue (LCIF) loading.
对面心立方结构多晶纯铜和纯铝在低周冲击疲劳载荷下循环形变的微观机制进行了研究。
2.
The micro morphology of low carbon steel cyclic deformed with low cycle impact fatigue was investigated It was found that the cycle deformation is caused by slipping.
观察了低碳钢在低周冲击疲劳过程中循环形变的显微特征。
3) Impact fatigue
冲击疲劳
1.
Impact Fatigue Resistance and Abrasiveness of Cross Rolled Medium Chromium Semi Steel for Grinding Ball;
斜轧中铬半钢磨球的冲击疲劳和磨损性
2.
Behavior of abrasive wear and impact fatigue of ductile iron;
球墨铸铁磨料磨损与冲击疲劳特性
3.
The microstructure and impact fatigue property of new type bainitic steel were studied by observation of microstructure and impact fatigue test at different heat treatment.
通过显微组织观察和冲击疲劳实验,研究了不同热处理新型贝氏体钢的组织和冲击疲劳性能。
4) low cycle fatigue
低周疲劳
1.
Study on fracture and intermediate temperature low cycle fatigue property of ladle shell material SM490B;
钢包材料SM490B钢断裂及中温低周疲劳性能研究
2.
Low Cycle Fatigue Behavior of ZL101 Aluminum Alloy;
ZL101铝合金低周疲劳行为研究
3.
Investigation of low cycle fatigue behavior of 16MnR steel at elevated temperature;
16MnR钢中温低周疲劳行为研究
5) low cyclic fatigue
低周疲劳
1.
The research on low cyclic fatigue behaviors was carried out at 400 ℃ for two kinds of Zr-alloys(1#, Zr-1Sn-0.
结果表明,2#合金的低周疲劳性能优于1#合金的低周疲劳性能。
2.
Fully reversed low cyclic fatigue (LCF)tests were conducted on [0 0 1], [0 1 2],[1 1 2], [0 1 1] and [11 4] oriented single crystals of nickel-based superalloy DD3 with different cyclic strain rates at 950℃.
在 ９５０℃ｔ对［０ ０１］、［０１２］、［１１２］、［０１１］和［１１４４］晶体取向的镍基单晶超合金 ＤＤ３试样进行了对称循环低周疲劳（ＩＣＦ）试验。
3.
Termal infrared imagery was u3ed to measure the surface temperature field of planar 40CrNiMoA steel specimens in low cyclic fatigue with thermal analysis provided.
通过红外热象仪对４０ＣｒＮｉＭｏＡ板试样在低周疲劳过程中的表面温度场测量及热分析计算；得到了试样表面热耗率的分布及其变化规律。
6) Low-cycle Fatigue
低周疲劳
1.
Low-cycle Fatigue Behavior of Die Cast Mg-7Al-0.5Y Magnesium Alloy;
压铸态Mg-7Al-0.5Y合金的低周疲劳行为
2.
The low-cycle fatigue tests of welded I-section bracing members;
焊接工字形截面钢支撑低周疲劳性能试验研究
3.
Prediction software of multiaxial low-cycle fatigue life;
多轴低周疲劳寿命预测软件
补充资料：低循环疲劳
分子式：
CAS号：
性质：当容器或构件，在使用期内，产生应力循环的次数在102～103之间的疲劳问题称为低循环疲劳。当循环次数小于102时，在工程上可以不考虑此容器或构件的疲劳效应。生产中使用的容器，一般的加压、卸压重复次数不多，均可视为低循环疲劳。
CAS号：
性质：当容器或构件，在使用期内，产生应力循环的次数在102～103之间的疲劳问题称为低循环疲劳。当循环次数小于102时，在工程上可以不考虑此容器或构件的疲劳效应。生产中使用的容器，一般的加压、卸压重复次数不多，均可视为低循环疲劳。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条