1) blending ratio
掺炼率
1.
However, high blending ratio of vacuum residue caused high cost and consumption.
中国石油化工股份有限公司济南分公司两套重油催化裂化装置近年来效益一直比较好 ,但同时又表现出成本高、消耗大的特点 ,其原因是由其特殊的重油催化裂化高减压渣油掺炼率工艺路线所决定的 ,高掺炼率虽然增加了能耗和催化剂等原材料的消耗 ,但更降低了原料成本 ,再加上产品结构的改善 ,从而保证了利润最大化的终极目标。
2) residue oil blending percentage
渣油掺炼率
3) blending
[英]['blendiŋ] [美]['blɛndɪŋ]
掺炼
1.
Application of blending vegetable oils and animal fats in fluid catalytic cracking unit;
动植物油在催化裂化装置上的掺炼应用
2.
In order to make full use of FCC slurry,SINOPEC Jinan Company conducted an experiment to test the feasibility of blending the slurry into feedstock of a delayed coking unit.
为解决催化油浆的出路问题,济南分公司在延迟焦化装置进行了掺炼催化油浆的试验,催化油浆在焦化原料中以不同的掺炼比例进行了试验。
3.
Three groups of blending oils(Cabinda and Oman,Maxila and Cabinda,Maxila and Daqin) were studied.
结果表明:不同原油掺炼比例适当时有可能使拔出率高于理论拔出率0。
4) thick oil liquid
掺炼油浆
1.
In this prodcedure,we choice vaccum pressure residual oil mixed with thick oil liquid obtained by refining heavy oil as crude material.
着重介绍氧化沥青的生产原料减压渣油,掺炼重油催化裂化油浆的可行性掺炼油浆的生产情况,最佳掺炼比的选择及掺炼重油催化裂化油浆产生巨大的经济效益情况。
5) blending ratio
掺炼比
1.
The analysis of the relationship between blending ratio and corrosion rate provides a good basis for future co.
同时分析了掺炼比与腐蚀速率关系,为今后防腐蚀工作提供了依据。
2.
Based on NUMOCORR Ⅱ software of numerical simulation jointly developed by State Key Laboratory of Heavy Oil Processing at University of Petroleum and Tsinghua University, comprehensive studies on the effect of different resid blending ratio on FCC product distribution were carried out.
利用石油大学重质油实验室和清华大学共同开发的渣油催化裂化提升管反应器三维气、固两相数值模拟软件NUMOCORR Ⅱ ,对具有复杂喷嘴分布的燕山石化Ⅰ催化提升管反应器 ,进行了不同渣油掺炼比对催化裂化产物分布影响的数值模拟研究。
6) Mix the proportion of smelting
掺炼比例
补充资料：掺掺
1.女手纤美貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条