1) Reactive alumina
活性氧化铝微粉
2) α-Al2O3 powder
氧化铝微粉
1.
The α-Al2O3 powders synthesized with 5%(in mass) α-Al2O3 crystal are micro-siz.
以一水软铝石为前驱物,加入矿化剂和晶种,在水热条件下,可以制出纳米级的氧化铝微粉。
3) Alumina micro-powder
氧化铝微粉
1.
By using the high pure alumina micro-powder (>99.
本试验采用高纯氧化铝微粉(＞99。
4) active alumina
活性氧化铝
1.
Microstructures of active alumina reproduction by heat-treatment method;
热处理法再生活性氧化铝的微结构研究
2.
Influences of surfactants on pore structure in active alumina beads;
表面活性剂对活性氧化铝孔结构的影响
3.
This paper probes into the influences of physical property of aluminum hydroxide on the strength of active alumina in the process of active alumina production with fast dehydration method.
探讨了快速脱水法生产活性氧化铝过程中氢氧化铝物性对活性氧化铝产品强度的影响。
5) activated alumina
活性氧化铝
1.
Decoloration of dyeing wastewater by activated alumina trickling filter in pulsed high voltage electric field;
高压脉冲电场中活性氧化铝滴滤床对印染废水脱色的效能
2.
Effect of fluoride removal of modified activated alumina;
改性活性氧化铝除氟性能研究
6) Active aluminum oxide
活性氧化铝
1.
This paper expounds the important function of the special active aluminum oxide for the oxydol in production of the oxydol with the anthraquinone process, and sums up the factors influencing the regeneration capacity of the active aluminum oxide and some problems needing attention.
阐述了双氧水专用活性氧化铝在蒽醌法双氧水生产中的重要作用,总结了影响活性氧化铝再生能力的因素及使用中应注意的问题。
2.
Alcohol dehydration to ethylene has been studied on active aluminum oxide catalyst in catalyst preparation and reaction.
以活性氧化铝为催化剂催化乙醇脱水生成乙烯的气固相反应、催化剂的制备条件和反应工艺条件 ,并对产物进行了分析与检测。
3.
The adsorption characteristics to the monomer containing trace water by silica gel, active aluminum oxide and 5A molecular sieve were studied, the penetrating curves and relationship between flow rate of monomer and adsorption capacity of the three adsorbents were obtained.
研究了硅胶、活性氧化铝和 5A分子筛脱除单体中微量水分的性能 ,得出三者的穿透曲线以及单体流速与吸附量的关系 ,还讨论了工业应用流程。
补充资料：活性硅微粉
分子式：
CAS号：
性质：化学成分为二氧化硅。由原矿经精选、粗碎、去杂、球磨、提纯、脱水、化学处理、分级成产品。活性硅微粉含SiO2>99.5％，Al2O3≤0.04%，Fe2O3≤0.03％，CaO≤0.05％，水溶性Cl—≤5mg/kg，水溶性Na+≤5mg/kg，灼减量≤0.13％。作为环氧树脂的填料，适用于大型部件的浇注，特别适用于精密小型电子元器件、集成电路的封装、灌封。
CAS号：
性质：化学成分为二氧化硅。由原矿经精选、粗碎、去杂、球磨、提纯、脱水、化学处理、分级成产品。活性硅微粉含SiO2>99.5％，Al2O3≤0.04%，Fe2O3≤0.03％，CaO≤0.05％，水溶性Cl—≤5mg/kg，水溶性Na+≤5mg/kg，灼减量≤0.13％。作为环氧树脂的填料，适用于大型部件的浇注，特别适用于精密小型电子元器件、集成电路的封装、灌封。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条