1) kinetics of phase transformation
组织转变动力学
2) tissue pharmacokinetics
组织动力学
1.
The tissue pharmacokinetics and residues of dan o floxacin in chickens were investigated by the HPLC method,and the dynamic inter related analysis of danofloxacin levels between plasma and tissue were performed with regression analysis method.
以高效液相色谱法为定量手段 ,研究了单诺沙星 (danofloxacin)在雏鸡体内的组织动力学特征 ,并采用回归分析法研究了血药浓度与组织药物浓度间的相关性。
2.
healthy chickens were selected to study tissue pharmacokinetics of Sarafloxacin Hydrochloride.
为研究盐酸沙拉沙星在蛋鸡体内组织动力学 ,选用成年健康蛋鸡 90只进行试验。
3) transformation kinetics
转变动力学
1.
The effect of Nb on the deformation-enhanced ferrite transformation was studied, and the transformation kinetics was analyzed.
利用热模拟压缩变形实验研究了含铌钢和相应成分的低碳钢过冷奥氏体形变强化相变的组织演变规律,探讨了铌在析出状态时对形变强化相变的影响,进行了转变动力学曲线的分析。
2.
deformation temperature,strain rate and prior austenite grain size, on the microstructural evolution,transformation kinetics and the critical strain (ε_c) for the completion of DEFT were investigated during deformation of undercooled austenite in a low carbon steel.
研究了低碳钢过冷奥氏体变形时,工艺参数即变形温度、变形速率和原始奥氏体晶粒大小对形变强化相变组织演变、转变动力学及相变完成时临界应变量εc的影响。
3.
Therefore, the higher strain is needed to accomplish the transformation, and the overall transformation kinetics becomes slower in the higher carbon content steels.
结果表明,锰含量相同时,碳含量提高,低碳钢形变强化相变孕育期延长,完成相变所需总应变增加,转变动力学曲线整体向高应变方向移动。
4) transformation dynamics
转变动力学
1.
The influences of processing parameters and the purity of materials on transformation dynamics were evaluated.
利用热模拟单向压缩实验,分析了Q235碳素钢应变强化相变过程中应变对铁素体晶粒数目及铁素体长大速度的影响,同时考察了铁素体转变动力学与应变速率、形变温度、奥氏体晶粒尺寸、纯净度的关系,并与无应变时进行比较。
5) kinetic transformation
动力学转变
1.
Determination of kinetic transformation of two geometrical isomers of the [Fe(PDT)_3]~(2+) by high performance liquid chromatography;
高效液相色谱法测定金属配合物{Fe[3-(2-吡啶基)-5,6-二苯基-1,2,4-三嗪]_3}~(2+)两种几何异构体的动力学转变
6) microstructure transformation
组织转变
1.
Grain growth and microstructure transformation in heat affected zone of fine-grain steels;
细晶钢焊接热影响区晶粒长大及组织转变
2.
The features of high temperature microstructure transformation of 16MnCr5 steel ingot were analyzed and its high temperature mechanical properties were measured.
分析了 16 Mn Cr5钢锭高温时的组织转变特点 ,并测定了其高温力学性能。
3.
The microstructure transformation of Si-Mn dual-phase steel with different hot-rolled process parameters and alloy elements was studied.
研究了在不同热轧工艺参数与合金化程度条件下Si-Mn双相钢的组织转变。
补充资料:动力机械:内燃机动力学
研究内燃机运转中的力学现象的科学。其主要任务是研究分析内燃机运转时各主要零件的运动规律及其受力情况﹐用以作为内燃机零件设计﹑计算的依据。它还研究这些力对内燃机动力装置的影响及其消减方法。内燃机动力学的主要内容为曲柄连杆机构运动学﹑曲柄连杆机构动力学和内燃机平衡分析等。
曲柄连杆机构运动学 研究曲柄﹑连杆﹐尤其是活塞的运动规律。活塞作周期性往复运动时的位移、速度和加速度可用下述各式近似求算
式中为曲轴转角﹔ 为曲轴旋转角速度﹔为曲柄半径﹔为曲柄半径 与连杆长度之比﹐即 = /
曲柄作回转运动﹐连杆作复杂的平面运动。连杆的运动往往被简化分解为随活塞组的往复运动和随同曲柄的旋转运动。
曲柄连杆机构动力学 研究分析曲柄连杆机构(见曲柄滑块机构)在运动中力的生成﹑传递和输出。作用在曲柄连杆机构上的力有曲柄连杆机构运动时产生的往复惯性力和离心惯性力﹐以及内燃机气缸内的气体压力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条