1) Polyurethane elastomer screen deck
聚氨酯弹性体筛板
2) polyurethane sieve plate
聚氨酯筛板
1.
The casting and moulding process for forming the polyurethane sieve plates is introduced briefly.
简要介绍了聚氨酯筛板浇注成型工艺过程 ,重点叙述了聚氨酯筛板浇注成型模具及浇注平台的结构与设计要点。
2.
This paper introduces the features of several kinds of polyurethane sieve plates and some matters needing attention in their erection and use, and the practice demonstrates that the polyurethane sieve plates can replace the steel ones.
经实践证明,用聚氨酯筛板替代钢筛板是可行的。
3.
The polyurethane sieve plate used in coal mines is one of these products.
矿用聚氨酯筛板就是其中之一。
3) polyurethane elastomer
聚氨酯弹性体
1.
Reinforcement effects of inorganic or organic filler on the polyurethane elastomer;
无机有机材料对聚氨酯弹性体的改性研究
2.
Performance of polyurethane elastomer with different inorganic fillers;
不同无机填料在聚氨酯弹性体中的性能对比
3.
Synthesis of transparent polyurethane elastomer;
透明性聚氨酯弹性体的合成
4) PUE
聚氨酯弹性体
1.
Research on Properties of Graphite/PUE Composite;
石墨/聚氨酯弹性体复合材料的性能研究
2.
Mechanical Properties of PUE Modified by EP;
环氧树脂改性聚氨酯弹性体
3.
Introduced isocyanurate groups can enhance the heat-resistant property of polyurethane elastomers(PUE),as well as other properties of this material.
通过TDI三聚反应生成异氰脲酸酯(IS)环,将其引入到聚氨酯弹性体(PUE)的大分子链中,考察其对PUE的热稳定性和力学性能的影响。
5) polyurethane
[英][,pɔli'jʊərəθeɪn] [美]['pɑlɪ'jurə'θen]
聚氨酯弹性体
1.
Studies on Structure and Properties of Transparent Polyurethane Elastomer;
透明聚氨酯弹性体结构与性能的研究
2.
Studies on the effect of microphase separation on heat-resistance property of polyurethane based on TDI
微相分离对聚氨酯弹性体耐热性能的影响研究
3.
A series of siloxane-containing polyurethanes were synthesized using polytetramethylene ether glycol(PTMG) and hydroxyl terminated polydimethylsiloxane(PDMS) as mixed soft segments.
以末端基为羟基的聚二甲基硅氧烷(PDMS)与聚四甲基醚二醇(PTMG)为混合软段合成出一系列含硅氧烷的聚氨酯弹性体。
6) polyurethane elastomers
聚氨酯弹性体
1.
Research on bonding between hydroxy-terminated polybutadiene rubber polyurethane elastomers and metal
端羟基液体橡胶聚氨酯弹性体与金属粘接的研究
2.
A series of casting polyurethane elastomers and rubber materials are prepared and characterized.
制备了一系列浇注型聚氨酯弹性体和橡胶材料,对其物理性能进行了表征,指出其拉伸应力-应变性能具有较大的差异,分析了两类橡胶材料的性能差异与材料内部结构的关系,对比研究表明,两种弹性体材料网络结构的不同导致应力应变行为的差异,而通过聚氨酯配方的调整可以缩小与橡胶材料性能的差异,满足材料综合性能的要求。
3.
PPDI-casting polyurethane elastomers were synthesized from PPDI、polymeric ployol and low-molacular weight diols.
以对苯二异氰酸酯(PPDI)、低聚物多元醇和小分子二元醇等为原料合成了PPDI浇注型聚氨酯弹性体,考察了不同低聚物多元醇对弹性体的物理机械性能、动态力学性能及热氧老化性能的影响,并与MDI和TDI型聚氨酯弹性体进行了比较。
补充资料：固体聚氨酯弹性体
分子式：
CAS号：
性质：固体聚氨酯弹性体是浇注聚氨酯弹性体、热塑性聚氨酯弹性体、混炼型聚氨酯及聚氨酯胶片的总称。广泛用于汽车工业、机械工业制作导轮、轧辊、耐磨元件、垫片、胶管等制件。
CAS号：
性质：固体聚氨酯弹性体是浇注聚氨酯弹性体、热塑性聚氨酯弹性体、混炼型聚氨酯及聚氨酯胶片的总称。广泛用于汽车工业、机械工业制作导轮、轧辊、耐磨元件、垫片、胶管等制件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条