1) force curve
力曲线
1.
Analyze and conversion of force curve measured by atomic force microscope;
原子力显微镜的力曲线分析与转化
2.
In this paper, molecule recognization was investigated using AFM/force curve combined with molecular mechanics calculation on the LB films with two Cu-phthalcyanines (CuPc) molecules and thin films of three kinds ladderlike functional organic molecule.
本文应用AFM及力曲线的统计方法并结合分子力学计算方法研究了具有不同官能团的两种酞菁分子的LB膜及聚丙烯基梯形高分子、它的有机纳米管及其超分子系列薄膜的分子识别。
3.
The force curve and the tendency of velocity changes the shot are essentially unanimous during the integrated shot putting process.
采用三维数字测力铅球仪对青少年运动员在整个投掷过程中的施力特征与动作技术特征进行分析,结果表明:(1)在完整推铅球动作过程中运动员对铅球的作用力曲线与铅球速度变化趋势基本一致,在最后用力动作过程中,合力曲线呈“双峰型”;(2)在最后用力开始左脚着地瞬间力值逐渐增大,到右腿蹬转使运动员身体由侧对投掷方向转为正对投掷方向瞬间出现第一次峰值;在推掷臂肘关节夹角约为90°时出现第二次峰值。
2) AFM force curve
AFM力曲线
1.
Study on adsorption behavior of thiol self-assembled monolayer on gold surface by AFM force curves;
硫醇自组装膜在金表面吸附行为的AFM力曲线研究
3) tension curves
张力曲线
1.
Plotting of tension curves of 3-roller tension unit;
三辊张力单元张力曲线的绘制
4) R-curve
阻力曲线
1.
In this paper, the strength-indentation load relation was analyzed, a new method is proposed to define the point in the K-curve at which the R-curve intersect the points form the locus of the R-curve.
结果发现这种改进的包络线法与常规的包络线法所测得的阻力曲线相吻合。
2.
The R-curve of SiC/BN laminated ceramics was evaluated using the indentation-strength method and compared with that of the monolithic SiC.
采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
3.
The crack-growth-resistance (R-curve ) behavior of Al 2O 3-SiCw and Al 2O 3-TiCp ceramic matrix composites was estimated by the indentation-strength method .
采用压痕 -弯曲强度法获得了Al2 O3 -SiCw和Al2 O3 -TiCp两种复合材料的阻力曲线 ,结果表明 ,与基体材料相比 ,两种材料均呈现出明显的上升阻力曲线行为。
5) pressure curve
压力曲线
1.
Characteristics of pressure curve in fractured reservoirs of Hailaer Basin;
海拉尔盆地裂缝性储集层压力曲线特征分析
2.
In the patient group,the left ventriculography(in right oblique 30 degree) and the pressure curve in left ventricle and aorta were recordered continuously before.
目的在介入诊疗时,利用左室压力曲线描记和左室造影的方法评价冠心病介入治疗前后左心室功能变化。
6) resistance curve
阻力曲线
1.
Study of single specimen COD resistance curve test by unloading compliance method;
单试样COD阻力曲线试验技术
2.
The resistance curves were measured with the standard three point bending specimens and the double edge notched tension specimens at different mis-matching welded joint.
对管线用钢焊接接头,测试了标准三点弯曲试样、同种接头及不同匹配状态的双边裂纹拉伸试样的阻力曲线。
3.
Finally, determination of ductile fracture toughness of high ductile metal using stretched zone and determination of critical fracture toughness by the point of intersection of the crack resistance curves and realistic blunting line are suggested.
最后建议对于高延性材料采用SZ法 ,用实测钝化线与阻力曲线的交点所对应的延性断裂韧度值作其临界
补充资料：短期劳动力需求曲线
短期劳动力需求曲线
短期劳动力需求曲线在其他变量，特别是对商品的需求保持不变的情况下，描述短期内工资水平和所需求的劳动力数量之间关系的曲线这条曲线是向右下方倾斜的。它表示工资水平和企业聘用人数之间存在着相反的或负的关系在市场经济条件下，企业的生产经营目标是追求利润最大化，增加新的劳动力是否合算，首先取决于由此而增加的收益是否大于所增加的成本。企业在对聘用决定进行分析时，常常假设劳动力是唯一能随工资的变化而改变的投入，而把其他生产要素如机器、设备、厂房等视为短期内的不变要素。如果劳动力要素相对于其他要素而言太少，则增加新的劳动力通常会增加企业能够生产和销售的产出数量，从而推动收益上升。尽管增加新的劳动力会增加企业的工资成本，但只要成本小于收益，企业就可以增加新的劳动投入。随着劳动力数量的增加，一般会提高总的产出水平。但是.每增加单位劳动带来的产品增量，即边际劳动产品，会逐渐减少，也就是说企业由增加劳动力所带来的利润增加量逐渐减少，最后变为。，企业将不再增加劳动力。如果工资水平比较高，利润为。的状态将比较早地达到，企业所增加的劳动力比较少;如果工资水平比较低，利润为。的状态将比较晚的达到，企业所增加的劳动力也就比较多。因而工资水平与劳动力需求量之间呈反向关系。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条