1) epoxy silicone coating
环氧有机硅涂层
2) Epoxy-silicone based coating
环氧改性有机硅涂层
3) silicone coating
有机硅涂层
1.
The corrosion behavior of 304 stainless steel and its corrosion prevention by Al/silicone coating in the presence of a pre-deposit solid NaCl and water vapor at 400℃ were studied.
研究了304不锈钢在400℃、盐和水蒸气综合作用下的腐蚀行为及添加Al粉的有机硅涂层对不锈钢的防护作用。
4) Epoxy-modified silicone
环氧有机硅
1.
The preparation and properties of heat resistance coating based on the epoxy-modified silicone were described, and the heat resistance of coating was assessed by thermogravimetric analysis (TGA) , electrochemical impedance spectrum (EIS) and scan electron microscope (SEM) .
采用环氧有机硅树脂与多种不同粒径陶瓷粉,研制出一种耐高温防腐蚀涂料。
5) epoxy silicone
环氧有机硅
1.
Mechanical property of high-and low-temperature resistant epoxy silicone adhesive cured at room temperature;
耐高低温环氧有机硅胶粘剂的力学性能研究
2.
In this paper, the high-and low-temperature resistant epoxy silicone adhesive cured at room temperature was introduced.
介绍了一种研制的室温固化、耐高温、耐低温环氧有机硅胶粘剂。
6) silicone coating agent
有机硅涂层剂
1.
The article describes silicone coating agents, their characteristics and reaction mechanism, WACKER Corporation's line of silicone coating agents including solvent - based, water - based, and 100% silicone coating a-gents, presenting a reference for customers' making a chose.
介绍了有机硅涂层剂及其特性、反应机理以及WACKER公司开发的溶剂型、水性和100％有机硅涂层剂系列化品种,以供用户选用时参考。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条