1) SIMA Technology
SIMA工艺
2) SIMA technique
SIMA制备工艺
3) SIMA semi-solid processing
SIMA法半固态加工
4) SIMA method
SIMA法
1.
Structural evolution of 7A04 alloy in the preparation of thixotropic billet by SIMA method;
SIMA法制备7A04合金半固态触变组织的演化
2.
Preparation of Semi-solid AlSi30 Billets by SIMA Method
基于SIMA法的AlSi30合金半固态坯料的制备
3.
The commercial 7A04 alloy as-extrusion was employed as raw material, and SIMA method (strain induced melting activety) was used to obtain semi-solid billet.
以挤压态7A04合金SIMA法生成触变组织为例,研究变形程度对其半固态触变组织的影响。
5) SIMA
[英]['saimə] [美]['saɪmə]
SIMA法
1.
Study on Semi-solid Microstructure of Magnesium Alloy for Upsetting in the SIMA Process;
SIMA法压缩形变镁合金半固态组织的研究
2.
Influences of technical parameters on preparing the semi-solid slurries of 3A21 alloy are investigated by the orthogonal test using the strain induced melt activation(SIMA) process under the experimental condition.
文章采用正交试验法研究了SIMA法制备3A21合金半固态坯料工艺参数的影响。
3.
Strain Induced Melt Activation (SIMA) is an ideal technique for solving the pollution problem with the significant advantages of simplicity and low equipment cost in the fabricating process.
本文采用基于大变形的SIMA法制备了半固态AZ91D合金,即将AZ91D合金进行等通道侧向挤压(ECAE)和正挤压预变形处理,再在半固态温度区间进行等温处理,通过控制预变形量、等温温度和保温时间等工艺参数获得了适合半固态成形的细小、均匀、呈近球形的微观组织。
6) new SIMA method
新SIMA法
1.
By using equal channel angular extrusion(ECAE) as strain induced step in strain induced melt activated(SIMA) and completing melt activated step by using semi-solid isothermal treatment,a new SIMA method was introduced firstly.
研究结果表明,新SIMA法制备的AZ91D半固态坯的微观组织均匀、晶粒球化程度好、晶粒细小,平均晶粒尺寸在20μm左右。
补充资料:采气工艺(见天然气开采工艺)
采气工艺(见天然气开采工艺)
gas production technology
,一‘J\匕乙吕天然气开采工艺pro以uetionteehnology)见
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条