1) recrystallization controlled rolling
再结晶型控轧
1.
The testing of producing 10～18mm gauges plate with recrystallization controlled rolling and accelerating cooling technology was simply introduced.
介绍了利用再结晶型控轧及快速冷却工艺 (RCR +ACC)生产厚 10～ 18mmQ34 5B中厚板的试验研究概况。
2) unrecrystallization control rolling
未再结晶控轧
1.
Prerequisite to unchangeable chemistry composition of conventional atmospheric corrosion-resistant steel 09CuPTiRE and SPA-H,Two high strength ultra-fine grain atmospheric corrosion-resistant steel were produced in the 1700mm hot rolling mill by adopting the microalioying of Nb,unrecrystallization control rolling and Deformation Induced Ferrite Transformation (DIFT) rolling.
高强度超细组织耐大气腐蚀钢是在保持09CuPTiRE 和 SPA-H 两种常规耐大气腐蚀钢成分基本不变的前提下,采用 Nb 微合金化及未再结晶控轧和变形诱导铁素体相变轧制技术,通过本钢1700mm 机组工业化生产试制, 使两种钢的铁素体晶粒尺寸细化至3～5微米,09CuPTiRE 钢板的屈服强度由目前的295MPa 级提高到450MPa 级； SPA-H 钢板的屈服强度由345MPa 级提高到500MPa 级,同时钢板的韧性大幅度提高,具备良好的耐大气腐蚀、成形和焊接等性能,可广泛应用于铁道车辆、集装箱和桥梁等耐大气腐蚀构件的制造。
3) rolling recrystallization
轧制再结晶
4) recrystallization model
再结晶模型
1.
The thesis simulated evolutionary process of the recrystallization rule of 16MnR plate during hot rolling and amend stat- ic recrystallization model by actual results in the presence of theory analysis and experiment model research.
借助于理论分析与实验模型研究,模拟了16MnR中板热轧变形时奥氏体再结晶规律的演化过程,并根据实测结果对静态再结晶模型进行了修正。
6) Dynamic Recrystallization Model
动态再结晶模型
1.
The Dynamic Recrystallization Model of As-cast Lead Brass in Quasi-superplasticity Deformation;
铸态铅黄铜准超塑性变形的动态再结晶模型
补充资料：二次再结晶(见再结晶晶粒长大)
二次再结晶(见再结晶晶粒长大)
secondary recrystallization
erCI 201」le」Ing二次再结晶(seeondary reerystallization) 见再结晶晶杠长大。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条