1)  Heat-resisting coating
耐热涂料
2)  heat resistant coatings
耐热涂料
3)  heat resistant
耐热
1.
Synthesis of novel high heat resistant epoxy resin containing naphthyl structure;
一种新型含萘环结构高耐热型环氧树脂的合成
2.
Study on heat resistant epoxy resin adhesive with high peel strength cured at room temperature;
室温固化高剥离耐热环氧树脂胶粘剂
3.
Development of Casting Dual-Phase Heat Resistant Alloy Fe-Cr-Ni-Al;
铸造Fe-Cr-Ni-Al双相耐热合金的研制
4)  heat-resistance
耐热
1.
The tray is a typical frame-shaped casting,it should have the abilities of heat-resistance,heat impact-resistance and crack-resistance through using different technologies and improving the technologies,make a simulated analyze on pouring system through CAST soft,investment casting CAE software.
薄壁耐热钢托盘属于典型的筐架结构型铸件,要求其有较高的耐热性、耐热冲击及抗裂能力。
2.
The mechanism of wear-resistance,heat-resistance and corrosionresistance of high chloride cast iron are analyzed respectively.
分析了高铬铸铁具有的抗磨、耐热、耐蚀性机理。
3.
A new duple-phase heat-resistance steel used at above 1 000 ℃ was obtained by adding some Ni to an original ferrite heat-resistance steel.
在高铬铁素体单相耐热钢的基础上,加入一定量的镍,得到一种新的奥氏体-铁素体双相耐热钢,并对该铬镍双相耐热钢的组织特征及常温和高温性能进行了测定。
5)  heat-resistant
耐热
1.
Study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;
室温固化耐热环氧胶粘剂的制备与性能研究
2.
Fire test on a non-heat-resistant fireproof glass with down-flowing water film;
带雨淋水膜的非耐热防火玻璃的火灾试验(英文)
3.
Research present state and development of heat-resistant epoxy adhesive cured at room temperature;
室温固化耐热环氧胶粘剂的研究现状及进展
6)  heat resistance
耐热
1.
Influence of three kinds of surface dispersants on the activity and heat resistance of Ru/AC catalyst for ammonia synthesis;
3种表面分散剂对Ru/AC氨合成催化剂的活性和耐热性的影响
2.
Effect of several kinds of antioxidant on heat resistance properties of chlorinated polyethylene;
防老剂对氯化聚乙烯耐热性能的影响
3.
Casting Magnesium Alloy of Mg-Nd-Zn-Zr Series with Heat Resistance and High Strength;
Mg-Nd-Zn-Zr耐热高强铸造镁合金
参考词条
补充资料：耐热涂料
分子式：
CAS号：

性质：指在200℃以上使用，涂膜不变色、不脱落，且仍能保持一定的物理机械性能的涂料，广泛用于烟囱、高温管道、热交换器、高温炉、石油裂解设备、发动机部位等方面，种类繁多，通常分为有机与无机两类。有机耐热涂料包括杂环聚合物耐热涂料和元素有机（有机硅、有机氟、有机钛）耐热涂料，以有机硅耐热涂料最为常用，清漆可耐200～250℃，配以金属粉、耐热填料后则可耐300～700℃高温。具有较好的耐热性、耐水性、电绝缘性和良好的机械性能，但硬度较低，耐燃性较差。无机耐热涂料有硅酸乙酯、硅酸盐、硅溶胶、磷酸盐涂料等，耐热温度可达400～1000℃，且耐燃性好，硬度高，但漆膜较脆。近年来，开发了采用有机树脂与无机涂料进行匹配或化学改性的无机-有机型耐热涂料。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。