1) low Cr steel
低铬钢
1.
The behaviors of three inhibitors on the low Cr steel (with and without pre-corroded film) were studied by polarization curve and electro-chemical impedance spectrum (EIS) technique.
利用极化曲线和交流阻抗技术对3种缓蚀剂在低铬钢光洁表面和预腐蚀产物膜上的缓蚀行为进行了初步研究。
2) low chromium cast semi steel
低铬半钢
1.
The effect of rare earths on eutectic carbide morphology of low chromium cast semi steel and low chromium cast semi steel after heat treatment, and thermal fatigue property of low chromium cast semi steel were studied.
研究了稀土元素对低铬半钢铸态及经热处理后组织中的共晶碳化物形状的影响 ,在此基础上着重研究了该材料的热疲劳性能。
2.
The effect of RE modification and heat treatment on impact fatigue property of low chromium cast semi steel was studied by means of impact fatigue test.
利用冲击疲劳试验 ,研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
3) low chromium semi steel
低铬半钢
1.
The structure and properties of low chromium semi steel processed with different hot deformation were observed, measured and analyzed.
通过对不同热变形量的低铬半钢的组织与性能进行观察、测试及分析 ,结果表明 :热变形能够显著改善低铬半钢的组织与力学性能。
2.
WT5”BZ]The influence of cooling rate after 35% hot deformation of low chromium semi steel on structure and properties has been studied.
对低铬半钢经 35 %热变形后用 4种不同冷却方式冷却后的组织与力学性能进行了研究 ,结果表明 ,热变形后冷却方式显著影响低铬半钢的力学性能。
3.
The interrelationships between rare earth(RE) modification and heat treatment of low chromium semi steel have been investigated with the view of improving eutectic carbides morphology.
结果表明 ,综合运用稀土变质处理和热处理工艺是改善低铬半钢共晶碳化物的形貌 ,提高综合力学性能的有效途径。
4) Low Chromium Semi-Steel
低铬半钢
1.
Effect of Rare Earth Elements on Carbide Morphology and Properties of Low Chromium Semi-Steel;
稀土对低铬半钢碳化物的形态及性能的影响
2.
The effect of SST103 quenching medium on hardness distribution and cracking character of low chromium semi-steel were studied.
研究了淬火介质SST103对低铬半钢的硬度分布及淬裂敏感性的影响。
5) low-chromium X65 steel
低铬X65钢
6) low carbon medium chromium steel
低碳中铬钢
补充资料：渗铬钢
分子式：
CAS号：
性质：将铬元素通过化学热处理工艺渗入工件表面层的钢材叫渗铬钢。铬在工件表面的沉积并向内部的反应扩散是渗铬的基本原理和过程。钢渗铬后不仅耐大气腐蚀性能好，而且也耐硝酸及其蒸气的腐蚀，所以冶金工业常用它生产具有不锈钢性能的复合钢板。应用比较普遍的渗铬方法有三种：固体法渗铬、气体法渗铬、熔盐法渗铬。
CAS号：
性质：将铬元素通过化学热处理工艺渗入工件表面层的钢材叫渗铬钢。铬在工件表面的沉积并向内部的反应扩散是渗铬的基本原理和过程。钢渗铬后不仅耐大气腐蚀性能好，而且也耐硝酸及其蒸气的腐蚀，所以冶金工业常用它生产具有不锈钢性能的复合钢板。应用比较普遍的渗铬方法有三种：固体法渗铬、气体法渗铬、熔盐法渗铬。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条