1) hollow powder
空心微粉
1.
Two -pack PU paint is prepared with h ydroxyl terminated polybutadiene(HTPB),diisocynate(TDI ),silky mica,hollow powder of glass an d other additive agents.
结果表明,适当地添加TK10或TK35空心微粉可以提高涂料与金属的黏结强度、耐酸碱腐蚀、热老化和耐水性能,改善外观、色彩和工艺性能。
2) fly-ash cenosphere particles
粉煤灰空心微珠
1.
Microwave absorption characteristics of surface treated fly-ash cenosphere particles;
粉煤灰空心微珠的改性及其吸波特性
3) hollow spherical power
空心球粉
4) fly ash cenospheres
空心微珠
1.
Electroless plating Co-P alloy on the surface of fly ash cenospheres;
空心微珠表面化学沉积Co-P合金研究
2.
Nanocomposite microwave absorbing coatings were prepared by using prepared Ni-Co-P/CNT and Ni-Co-P/fly ash cenospheres composite powders as absorbers,choosing epoxy resin as film forming resin and adding some proper solvent,curing agent and auxiliary agents.
以Ni-Co-P/CNT复合粉体和Ni-Co-P/空心微珠复合粉体作为吸收剂,选用高分子聚合物环氧树脂作为成膜树脂,同时加入适当的溶剂、固化剂和助剂制备出纳米复合微波吸收涂料,并将涂料涂刷于塑料薄板上制备出涂层样品。
5) hollow microsphere
空心微球
1.
Large scale preparation and characterization of NiO hollow microspheres
NiO空心微球的规模化制备与表征
2.
NiS2 hollow microspheres were prepared by hydrothermal reaction between NiCl2·6H2O and Na2S2O3·5H2O at the low temperature of 150°C.
5H2O为原料,在150℃较低温度的水热条件下制备了NiS2空心微球,用XRD和SEM对产物进行了表征,NiS2粉体的X射线衍射的衍射峰均与标准衍射图一致(JCPDS:653 325,立方晶系,a=0。
3.
Subsequently, the similar microstructured NiO hollow microspheres were obtained by calcining the above precursor at 400 ℃ for 2 h.
报道一种非常简单的制备NiO和Ni(OH)2空心微球的无模板水热法,即通过NiCl2与氨水在140℃水热反应12h,制备了Ni(OH)2纳米片自组装的空心微球,经400℃热处理2h得到了NiO空心微球。
6) hollow microsphere
空心微珠
1.
Analysis of surface morphology structure of electroless silver-deposited hollow microsphere;
空心微珠化学镀银的表面结构形态分析
2.
The glass fiber reinforced nylon 6 was modificated by the filling of the hollow microsphere.
利用空心微珠球型的特性,填充改性玻纤增强尼龙6。
补充资料：空心粉番茄汤
原料：番茄--1/2个，空心粉--1大匙，干酪--1/2小匙，鸡精--1小匙
制法（1） 交过分心粉煮熟之后切成5mm长。
（2） 将番茄去皮去瓤之后榨成汁。
（3） 将鸡精用不着/4杯水调匀。
（4） 将空心粉、番茄汁、鸡精放入锅中同煮。
（5） 煮沸之后撒上干酪粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条