1) relief area
泄放面积
1.
According to these three methods, the relief calculation system of dust explosion developed with Visual C++ and how to calculate the relief area in the system were introduced.
介绍了用VisualC ++开发的粉尘爆炸泄放计算系统以及如何在该系统中进行粉尘爆炸泄放面积的计算 ,指出了使用该系统计算粉尘爆炸泄放面积的优越性 ,并给出了相应的界面图和算
2.
And the general calculation methods to calculate the relief area of dust explosion in closed vessels and buildings were concluded and summarized, and a visible application: Relief Calculation System of Dust Explosion, was developed by using VB.
对目前国内外计算密闭容器和建筑物内粉尘爆炸泄放面积的常用计算方法进行了归纳总结,并用VB开发了可视化应用程序-粉尘爆炸泄放计算系统。
2) well drainage area
泄油面积
1.
Reservoir engineering method is adopted to calculate recovery indexes such as the horizontal well's limited recovery factors, well drainage area, reservoir limited recoverable reserves and water cut an.
应用油藏工程方法计算了水平井极限采收率、泄油面积和油藏极限可采储量、含水率等开发指标,其结果与数值模拟结果基本吻合。
2.
Compared with vertical wells,horizontal wells has the advantages of shortening distance between wells,extending well drainage area,increasing critical coning flux,controlling the injection fluid and improving oil displacement efficiency.
与直井相比,水平井开发具有缩短油井井距,扩大泄油面积,提高临界锥流量,更好地控制注入流体、改善波及效率等优势。
3) pressure relief area
泄压面积
1.
By using the model of bounded explosion,the maximum explosion pressure of the gas supply house with explosive pressure relief area is discussed in detail.
针对目前国内城市燃气站房防爆泄压存在的问题,利用有约束可燃气体爆炸泄压模型,对有密封材料泄压面积的最大爆炸压力进行了详细的分析和讨论,论述了合理布置可燃气体站房泄压面积的方法。
4) explosion venting area
泄爆面积
1.
Based on these,the explosion venting area are calculated by using methods of K_(?t) and S_t formula in fixed dimenstion equipment,elevator and hop-pocket dust catcher in Canada imported wheat transportation.
分析了粮食粉尘在密闭设备中的爆炸发展过程,引用了等温爆炸模型假设、燃烧产物质量变化速率、压力上升速率的概念及公式,在此基础上对泄爆面积的计算理论和方法进行了分析和归纳,利用爆炸指数K_(st)值诺谟图公式法和粉尘爆炸等级S_t诺谟图公式法对进口加拿大小麦在定容设备、斗式提升机及袋式除尘器储存输送过程中的泄爆面积进行了计算。
5) drainage area
泄流面积
1.
It can increase more efficiently the drainage area,through which the oil flows to the well from reservoir better than routine perforation,and so increase the productivity of the well.
多级脉冲射孔技术利用两级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲多次冲击射孔孔眼前沿的裂缝使其有效延伸至地层深处,较单独的射孔更能有效的增大油层向井眼的泄流面积,增加油气产量。
6) leakage area
泄漏面积
补充资料：掣掣泄泄
1.随风飘荡貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条