1) bamboo laminate
竹材层合板
1.
Due to the anisotropy and non-homogeneity of bamboo laminate, its mechanical behaviors are very complicate.
竹材层合板是为了满足一定的使用要求,由多层单向板按同一方向整齐排列、胶合、加热固化处理而成的复合结构体。
2) laminated bamboo boards
竹材层压板
1.
The results showed that the adhesive rate did not affect MOR and MOE of the laminated bamboo boards.
在设定的研究条件下，浸胶量对竹材层压板的静曲强度和弹性模量无显著影响，对冷水浸泡厚度膨胀率和沸水蒸煮厚度膨胀率有显著影响，厚度膨胀率随浸胶量的减少而增大。
3) Wood-bamboo laminated veneer lumber
竹木复合单板层积材
4) bamboo composite board
竹材复合板
1.
By use of cold press method, in which the surface of basic board is covered by bamboo flake and the back is covered by common turning wooden veneer, bamboo composite board is developed.
以湿法中密度纤维板生产工艺生产的高密度纤维板为基材 ,采用热进冷出热压工艺研制浸渍三聚氰胺的纸质装饰贴面板、浸渍三聚氰胺的天然薄木装饰贴面板 ;以冷压法研制基材表面覆盖竹片 ,背面配置普通旋切木质单板的竹材复合板 。
5) bamboo plywood
竹材胶合板
1.
The results showed that the physical and mechanical properties of the bamboo plywood made with this mixed adhesive were all above the deman-ds of national specialized standard, and that its processing method and parameters were similar to those of plywood made with pure PF-resin, b.
本研究用马尾松全树皮胶代替50％的酚醛树脂生产竹材胶合板,用正交试验方法选择最佳的生产工艺。
2.
Bamboo plywood was ripsawn into 5 mm thick slats by means of a 355 mm diameter carbide tipped saw with thickness of 2.
供试圆锯是直径３５５ｍｍ、齿数５０、锯厚２０ｍｍ、锯路２４ｍｍ的硬质合金圆锯片，每次锯下厚５ｍｍ的竹材胶合板，测定进给阻力、切削功率。
6) laminated sheet
层合板材
补充资料：N,N-二缩水甘油2,4,6-三溴苯胺玻璃布层合板
分子式：
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
CAS号：
性质：以三溴苯胺环氧树脂为基料的玻璃布层合板。耐燃性好，相对密度>1.98。机械强度除冲击强度(190kJ/m2)和剪切强度(119MPa)外，其他略次于E-51环氧树脂。将三溴苯胺环氧树脂与有关添加剂配成胶液后，手工糊于玻璃布上，叠层并层合固化即得。可用于要求耐燃的航空、船舶和机电行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条