说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脆断分析
1)  Brittle fracture analysis
脆断分析
2)  Brittleness analysis
脆性分析
3)  vulnerability analysis
脆弱性分析
1.
While stressing public risk analysis, the paper introduces vulnerability analysis and puts forward risk information sharing mechanism and communication mechanism in order to explore a set of research methods of dangerous chemicals logistics public risk management system.
在强调公共风险分析的同时引入脆弱性分析,并且提出风险信息共享机制和沟通机制,探索出一套完整的危险化学品物流公共风险管理体系的研究方法。
2.
The grid vulnerability analysis is important to fault prevention and system operational security.
电网的脆弱性分析对于指导事故防控和确保系统安全稳定运行具有重要意义。
3.
Network security leak scan and vulnerability analysis are the base of system security evaluation and the essential components of Information security system.
网络安全漏洞扫描与脆弱性分析是进行系统安全评估的基础和信息安全保障体系中的必要组成部分。
4)  brittle fracture
脆断
1.
Cause study and countermeasures for core rod brittle fracture of suspension composite insulators on 220kV Ping-He line;
220kV坪核线复合绝缘子芯棒脆断原因分析及对策
2.
From the view of brittle fracture of aluminum buckles during bending,the cause of formation of brittle fracture was analyzed.
针对某企业工业纯铝扣件制品在弯折过程脆断的问题,考察了生产工艺中各工序的技术条件,分析论证了使其塑性降低的原因,判定氧化着色过程中除油及着色技术条件控制是主要影响因素。
3.
Through analyzing and studying microstructure,chemical composition,fracture appearance,inclusion appearance,surface quality and drawing process of 82B wire rod of brittle fracture during drawing,breaking causes are pointed.
通过对拉拔过程中发生脆断的82B线材的金相组织、化学成分、断口形貌、夹杂物形貌、表面质量及拉拔工艺的分析和研究,指出82B线材在拉拔过程中产生断裂的原因,并提出选择合适的拉拔速度、正确调整轧机状态、采用时效处理、加大斯太尔摩线的冷却速度等改进措施,可提高产品质量。
5)  fracture [英]['fræktʃə(r)]  [美]['fræktʃɚ]
脆断
1.
Through the failure analysis of the top die block of the cold extruding die for stainless steel wires, with 7Cr7Mo3V2Si steel and deep cold treatment to stress the match of hardness-malleability and wearability, the early fracture problem of the die was solved and the service life of the die has greatly prolonged.
通过对不锈钢丝冷挤压模上模块的失效分析 ,并改用7Cr7Mo3V2Si模具钢和深冷处理工艺 ,突出了强韧性和耐磨性的匹配 ,解决了该模具的早期脆断问题 ,大幅度提高了不锈钢丝冷挤压模的寿命。
2.
Based on the fracture of loco axle made by EA4T steel,the composition,mechanical property,fracture feature and microstructure of the axle have been investigated;The influence of metallurgical quality on the properties of the axle also have been discussed.
最终认为:车轴在精加工过程的脆断发生前,内部业已存在无损探伤所检测到的裂纹面,它的产生与车轴内局部存在较多的疏松、孔洞和材质标准中所不允许出现的点状偏析有关。
6)  brittle failure
脆断
1.
Hard coil rod structural determines hard coil rod's technological functions,set up a claim to the regular,fine and high content sorbite for hard coil rod is used for drawing or draw failure and brittle failure will happen.
索氏体若细化不好或出现其它异常组织 ,就会出现拉拔断或脆断现象。
2.
To analyze brittle failure of 70#,65# series high carbon wire rod during wire drawing.
对于高碳70#、65#系列盘条在拉拔过程中常出现的脆断现象进行分析,指出碳偏析、缩孔、表面横裂、内部气泡是导致盘条在拉拔过程中发生断裂的主要原因。
补充资料:脆断
1.脆而折断。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条