1) submarine pressure hull
潜艇耐压壳
1.
Damping vibration and interlaminar stresses of submarine pressure hull with anechoic tile in fluid;
带有消声瓦的潜艇耐压壳在流场中的阻尼振动和层间应力
2.
Specimen was designed to simulate the weld of submarine pressure hull according to its welding procedurne, and the explosive procedune was designed to relieve welding residual stress of the specimen according to the basic principle and the experience of welding residual stress relieving by using explosive method.
根据潜艇耐压壳焊接工艺制作了模拟焊接试板 ,并根据爆炸消除焊接残余应力基本原理和国内外实践经验 ,设计了爆炸消除模拟焊接试板残余应力的工艺 ,进行了爆炸消除 92 1A钢焊接残余应力试验研究。
2) submarine pressure hulls
潜艇耐压壳体
1.
Estimation of fatigue life and crack size of submarine pressure hulls under stochastic loading with fracture mechanics method;
在随机载荷作用下用断裂力学法估算潜艇耐压壳体的疲劳寿命和裂纹尺寸
3) submarine pressure hull
水下承压外壳;潜艇承压壳
4) pressure hull
耐压壳体
1.
Optimum design of multiple intersecting spheres great deep-submerged pressure hull;
藕节形大深度潜水器耐压壳体优化设计
2.
Optimal design of the pressure hull structure of a deep sea glider;
深水滑翔机器人耐压壳体结构优化设计
3.
The static mechanical property of the spherical and multiple intersecting spherical deep-submerged pressure hulls and the influences of diversified parameters have been investigated theoretically and numerically in this paper under the guidance of my tutor.
本文通过理论分析和数值计算对球形和藕节形大深度潜水器耐压壳体的强度和稳定性性能进行系列研究,并分析了各种参数对其力学性能的影响,参考规范编程对这两种耐压壳体进行优化设计,为球形和藕节形大深度潜水器耐压壳体的结构设计提供了依据和参考。
5) pressured spherical hull
耐压球壳
1.
Because these openings will weaken the Ultimate Strength of the pressured spherical hull and pressured spherical hull works in the environment of the sea of kilometers deep, knowing the mainly pressured structure s ultimate strength will be of great significance and Designers must also issues of concern.
本文利用ABAQUS有限元软件对开孔耐压球壳的极限强度进行了非线性有限元分析,计算了开孔的大小及加强围壁参数的变化对壳体极限强度的影响。
6) pressure spherical hull
耐压球壳
1.
In this paper the structure multi-objective optimal design of the pressure spherical hull in a deep manned submersible is completed with a combined optimal method which is based on Response Surface Method(RSM) and Genetic Algorithm(GA).
采用基于响应面(RSM)近似模型和遗传算法(GA)对某深海载人潜水器耐压球壳进行多目标优化设计。
2.
In this paper the structure optimal design of the pressure spherical hull in a deep manned submersible is completed with a combined optimal method and this method is based on Response Surface Method (RSM) and Genetic Algorithm (GA).
本文采用组合优化方法对某深海载人潜水器耐压球壳进行优化,该组合优化方法基于响应面(RSM)近似模型和遗传算法(GA)。
补充资料：潜艇服
中文名称: 潜艇服
解释
title 潜艇服
亦称“潜艇特装”，是潜艇人员工作时穿着的军装。主要包括：潜艇防寒服、潜艇工作服、冬防酸衣、帆布工作服、防酸手套、太阳镜、污衣袋等。潜艇工作服具有紧身、防油、防酸、防水等特点。潜艇防寒服是供潜艇指挥塔人员春、冬季由水下航行转为水面航行时穿用，具有轻便、保暖和一定的防水性能。其上、下衣分解，防风帽与上衣连接，袖、裤口为紧缩式。面料为细帆布，保暖层为长毛绒。核潜艇工作服为连体式，供核潜艇人员在艇上穿用，具有防尘埃沾染、易洗涤、易穿脱等性能，采用漂白全棉平布制作。使用中定期检验，超过允许剂量时及时更换，以保证艇员身体不受损害。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条