1) chlorobutadiene rubber
氯化顺丁橡胶
1.
Study on properties of chlorobutadiene rubber/CR,NBR or CPE blends;
氯化顺丁橡胶与CR,NBR或CPE并用胶性能的研究
2) chlorinated-esterified polybutadiene rubber
氯酯化顺丁橡胶
1.
For the purpose of improving the ageing resistibility and polarity, in the case of organic acid's existence, probability of synthesizing low chlorine content chlorinated-esterified polybutadiene rubber had been studied in this paper.
本论文以提高顺丁橡胶的耐老化性能和改善极性为目的,研究了在甲酸存在的情况下,合成低氯含量的氯酯化顺丁橡胶(CBR)的可行性,并用核磁共振对氯化后橡胶的结构和氯结合量进行了表征和定量计算,以此为基础,深入研究了不同氯含量氯酯化顺丁橡胶的氯化效率、凝胶含量、玻璃化温度、热稳定性和产率。
2.
For the purpose of studying the properties mixing with other polymers of chlorinated-esterified polybutadiene rubber(CEBR), CEBR mixed with BR,S-SBR,R-SBR had been studied in this paper.
本文以研究氯酯化顺丁橡胶的并用性能为目的,系统地研究了氯酯化顺丁橡胶分别与顺丁橡胶、乳聚和溶聚丁苯橡胶并用的情况,对并用胶的配方进行优化设计,并对并用胶进行力学性能测试,主要有拉伸强度、扯断伸长率、撕裂强度和硬度等,以试验并用胶两胶种的配比对力学性能的影响。
3) cis-1,4-polybutadiene rubber
顺丁橡胶
1.
Developments of rare earth catalyst for cis-1,4-polybutadiene rubber;
合成顺丁橡胶用稀土催化剂的开发进展
2.
Structure and properties of cis-1,4-polybutadiene rubber/organic montmorillonite nanocomposites;
顺丁橡胶/有机蒙脱土纳米复合材料的结构与性能
3.
Low Mooney viscosity cis-1,4-polybutadiene rubber polymerized by nickel system catalyst;
镍系低门尼黏度顺丁橡胶
4) butadiene rubber
顺丁橡胶
1.
Industrial development of rare earth butadiene rubber in China;
中国稀土顺丁橡胶的工业化开发
2.
Discussion on energy conservation technology in cis-1,4-polybutadiene rubber condensation;
顺丁橡胶凝聚节能降耗技术探讨
3.
Tensile stress-strain behavior of butadiene rubber/organo-montmorillonite nanocomposite Ⅰ.Stress-strain curves and its simulation;
顺丁橡胶/有机蒙脱土纳米复合材料的拉伸应力-应变行为 Ⅰ.应力-应变曲线及其理论模拟
5) polybutadiene rubber
顺丁橡胶
1.
The application of Ni-family oil-extended polybutadiene rubber BR9073;
镍系充油顺丁橡胶BR9073的应用
2.
The effects of compounding recipes,carbon black,processing oil,as well as cure time on the properties of polybutadiene rubber synthesized by rare-earth catalyst(NdBR)were studied in this paper.
研究了胶料配方、炭黑、操作油以及硫化时间对稀土顺丁橡胶(NdBR)性能的影响。
3.
With the growing demand for polybutadiene rubber in China and the self-sufficient rate is decreased by years,the self-sufficient rate of butadiene is increased greatly.
国内顺丁橡胶需求越来越旺盛,自给率逐年下降,而其原料丁二烯市场国内自给率大幅提高。
6) BR
顺丁橡胶
1.
Structure and properties of BR/OMMT nanocomposites prepared by solution intercalation method;
溶液插层法制备顺丁橡胶/有机蒙脱土纳米复合材料的结构与性能
2.
Study on silicone rubber/BR/EPDM blend;
硅橡胶/顺丁橡胶/乙丙橡胶共混材料的研究
3.
The Improvement Research about Grafting NP on BR;
壬基酚聚氧乙烯醚接枝改性顺丁橡胶的研究
补充资料:氯化丁基橡胶
分子式:
CAS号:
性质:将丁基橡胶进行氯化,制得氯化丁基橡胶。氯化是在特定的卤化反应器中,同时通入丁基橡胶的烷烃溶液和氯气,生成氯化丁基橡胶,控制其含氯量在1.1%~1.3%,再经分离、中和等工序得到成品氯化丁基橡胶。丁基橡胶氯化后,与其他橡胶的共混性和粘接性大为改善,硫化速度大大提高,特别适用于制造无内胎轮胎的内密封层。
CAS号:
性质:将丁基橡胶进行氯化,制得氯化丁基橡胶。氯化是在特定的卤化反应器中,同时通入丁基橡胶的烷烃溶液和氯气,生成氯化丁基橡胶,控制其含氯量在1.1%~1.3%,再经分离、中和等工序得到成品氯化丁基橡胶。丁基橡胶氯化后,与其他橡胶的共混性和粘接性大为改善,硫化速度大大提高,特别适用于制造无内胎轮胎的内密封层。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条