1) wedge and junction
尖劈和接头
2) cleavage joint
劈裂接头
1.
The analysis of stress distribution in bi-adhesives bonded cleavage joints;
混合胶接劈裂接头胶层中应力分布的数值分析
2.
Based on the finite element analysis software ANSYS,the elasto-plastic finite element numerical simulation and analysis for normal stress and shear stress distribution in the middle of adhesive layer of steel cleavage joints were carried out.
采用有限元分析软件ANSYS,对钢制劈裂接头上胶层中部的正应力和剪切应力的分布进行了弹塑性有限元数值模拟与分析。
3) tip
[英][tɪp] [美][tɪp]
尖头;接头
4) spires
[英][spaiə] [美][spaɪr]
尖劈
1.
Discussion on the simulation of atmospheric boundary layer with spires and roughness elements in wind tunnels;
关于风洞中用尖劈和粗糙元模拟大气边界层的讨论
5) Wedge
[英][wedʒ] [美][wɛdʒ]
劈尖
1.
The Resarch Experiment for Measuring the Diamefer Offilament by Wedge;
利用劈尖干涉测定细丝直径的实验研究
2.
For wedge experiment, using the concept of coherent length, we obtain the condition for emerging interference fringe obviously.
从相干长度的角度,回答了劈尖干涉条纹出现的条件。
3.
The ways of measuring the liquid refractive index are discussed through the width of interfered stripe by using experimental set of wedge interference.
提出了用劈尖干涉实验装置,通过测量干涉条纹的宽度来测量液体折射率的方法。
6) wedge film
劈尖
1.
Without changing the angle of the wedge film,the width of the interference fringe is measured when the wedge film is filled with some kind of liquids and air respectively.
采用劈尖实验装置在不改变劈尖膜条件下,同时测得空气膜和液体膜的干涉条纹宽度,并进一步计算出实验结果,从而得到一种方便求出液体折射率的新方法。
2.
In studying the interference of equal thickness in wedge films, the formula of difference of optical path is strictly deduced, and the tenable conditions of the optical path difference equation in traditional textbook is clarified.
研究了劈尖等厚干涉问题,对其光程差公式进行了严格推导,阐明了传统教材光程差公式成立的条件。
3.
The refractive index of liquids is obtained by means of the wedge film interference in the experiment of the interference of equal thickness.
在等厚干涉的实验中,加入了用劈尖干涉对比法测液体折射率的内容,在不改变劈尖膜的条件下,同时测得空气膜和液体膜的干涉条纹宽度,从而可方便地求出液体的折射率,也使得等厚干涉的实验内容更加丰富和充实。
补充资料：弹性橡胶管接头
分子式：
CAS号：
性质：橡胶连接件的一种。系用于金属管道之间起挠性连接作用的中空橡胶制品。按连接方式分松套法兰式、固定法兰式和螺纹式三种；按结构可分为单球体、双球体、异径体、弯球体及风压盘管等五种。由内外胶层、帘布层和钢丝圈组成管状橡胶件，经成型硫化后再与金属法兰或平形活接头松套组合而成。此类产品可降低振动及噪音，并可对因温度变化引起的热胀冷缩起补偿作用，广泛应用于各种管道系统。
CAS号：
性质：橡胶连接件的一种。系用于金属管道之间起挠性连接作用的中空橡胶制品。按连接方式分松套法兰式、固定法兰式和螺纹式三种；按结构可分为单球体、双球体、异径体、弯球体及风压盘管等五种。由内外胶层、帘布层和钢丝圈组成管状橡胶件，经成型硫化后再与金属法兰或平形活接头松套组合而成。此类产品可降低振动及噪音，并可对因温度变化引起的热胀冷缩起补偿作用，广泛应用于各种管道系统。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条