1) transitional layer brazing
过渡层钎焊
2) buttering
[英]['bʌtə] [美]['bʌtɚ]
过渡层堆焊
3) transition layer weld
过渡层焊缝
1.
The results show that the tensile strength of the joints was 512 MPa,and the microstructure transition between clad metal/heat affected zone/transition layer weld was mild,and biphase proportion of austenite and ferrite was in the required range.
对SAF2205/16MnR双相不锈钢复合板进行了焊接,基层采用手工电弧焊,以E5015焊条为填充材料,过渡层及覆层采用钨极氩弧焊,以ER2209焊丝为填充材料;对焊接接头进行了拉伸试验,利用扫描电镜、光学显微镜及X射线衍射仪等分析了接头过渡层焊缝及其熔合区域的显微组织及物相组成。
5) monolayer brazing
单层钎焊
1.
Using a commercially available alloy such as BNi2 which contains the active elements Ti and Cr, and a self-made CuSnNiTi alloy as an active filler materials, a monolayer brazing diamond grinding wheel has been made in a vacuum furnace.
应用真空钎焊技术,分别采用含有强碳化物形成元素Cr,Ti的BNi2,CuSnNiTi活性钎料进行金刚石的单层钎焊,通过微分扫描式热分析(DSC)及界面能谱分析(EDS)表明,在一定的钎焊温度、时间及真空度下,金刚石与钎料及基体之间均可形成化学冶金结合,但结合的状况及锯切性能随钎料的不同而改变。
6) brazing coating
钎焊涂层
1.
A(Wc Co/NiCrBSi)brazing coating was made on 45# steel through vacuum brazing technology.
采用真空钎焊工艺，将ＷＣ－Ｃｏ硬质合金粉和ＮｉＣｒＢＳｉ（ＡＷＳＢＮｉ－２）合金粉钎焊到４５＃钢表面，得到（ＷＣ－Ｃｏ／ＮｉＣｒＢＳｉ）钎焊涂层。
补充资料：层层加码
1.谓逐级增加任务和逐级提出各种要求等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条