1) reduced glass temperature
约化玻璃温度
1.
With the increasing of mass fraction of Ti, the supercooled liquid region ΔT_x decreases greatly, but the reduced glass temperature T_(rg) increases gradually.
结果发现,随着Ti质量分数的增加,非晶合金的过冷液相区温差ΔTx逐渐减小,而约化玻璃温度Trg逐渐增加,对应的楔形试样中非晶区的最大厚度(dm)逐渐增加,表明Ti的加入可以明显的提高非晶形成能力。
2) reduced glass transition temperature
约化玻璃转变温度
1.
They both possess the relatively higher reduced glass transition temperatures(T_(rg)) of 0.
两合金均具有较高的约化玻璃转变温度(Trg),分别为0。
2.
A large supper cooled liquid region up to 32K and a high reduced glass transition temperature of 0.
发现Fe74Cr2 Mo2 Sn2 P10 Si4B4C2 具有 32K的超冷液相区和高达 0 6 1的约化玻璃转变温度 ,具有很强的玻璃形成能力。
3.
Fe 74Al 4Sn 2P 10Si 4B 4C 2 and Fe 74Al 4Sn 2P 11C 4B 4Si 1 bulk amorphous alloys have high reduced glass transition temperatures (T g/T m≈0.
Fe74 Al4 Sn2 P1 0 Si4 B4 C2 和Fe74 Al4 Sn2 P1 1 C4 B4 Si1 块体非晶合金具有较高的约化玻璃转变温度 (Tg Tm≈ 0 6 0 )。
3) glass transition temperature
玻璃化温度
1.
Effect of hardeners with different structure on glass transition temperature of cured epoxy resins: A molecular dynamic simulation approach;
不同固化剂对环氧树脂玻璃化温度影响的分子动态模拟研究
2.
QSPR study on glass transition temperatures of polystyrenes by using Quantum - Chemistry descriptors;
量子化学参数研究聚苯乙烯类玻璃化温度的定量构效关系
3.
Predictions of glass transition temperature of terpolymers via neural networks;
利用神经网络预测聚合物玻璃化温度
4) glass temperature
玻璃化温度
1.
It also studies the effects of different glass temperatures on the mechanical properties.
介绍了苯丙乳液的合成及性能,并讨论了乳化剂的类型、乳化剂的量、引发剂的量、滴加速度、反应温度对乳液粒径的影响,同时研究了不同玻璃化温度对苯丙乳液力学性能的影响。
2.
The latex particles size, distribution morphology, structure, surface group quantity, glass temperature and the stabilities were determined.
在相同的配方条件下 ,采用无皂乳液聚合制备苯乙烯 /丙烯酸丁酯 / N,N-二甲基 ,N-丁基 ,N- ( 3-甲基丙烯酰胺基 )丙基溴化铵 ( St/ BA/ DBMPA)阳离子共聚物复合乳液 ,考察了单体加料方式对乳液粒子大小、形态、结构、表面性质的影响及对最终聚合物玻璃化温度和乳液的稳定性的影响。
3.
By studying the several important control indicators of glass powder,such as crystallization,glass temperature,the optimum proportion of glass powder is made certain.
通过研究玻璃粉的几个重要控制指标如析晶、玻璃化温度,确定了玻璃粉的最佳配比。
5) glass-transition temperature
玻璃化温度
1.
The effects of plasticizers TP-95 and TP-90B on the glass-transition temperature,low-temperature performance,curing characteristics, mechanical properties and the resistance of heat aging property for NBR were studied,compared with common plasticizers DOA and DOP.
结果表明,添加含醚基的TP-90B和含醚酯基的TP-95使NBR硫化胶的玻璃化温度明显降低,低温拉伸性能和低温脆性性能优于DOA和DOP。
2.
Results show that the glass-transition temperature has been enhanced by 43 ℃,the tensile strength is increased 17.
结果表明,SiO2、TiO2和SiC混合掺入质量分数为4%时,玻璃化温度提高了43℃,抗拉强度提高了17。
6) glass transition temperature
玻璃化转化温度
补充资料：限约
1.限制约束。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条