1) large tow
大丝束
1.
The manufacture process of large tow carbon fibre (60K) prepreg with hot-melt method is briefly introduced in this paper; in addition, several typical factors, which affect the quality of the prepreg, were also discussed in detail .
简要介绍了热熔法制备大丝束炭纤维(60K)预浸料的工艺过程,并着重对影响预浸料质量的几个主要因素进 行了讨论,结果表明,严格控制预浸温度、纤维张力、预浸压力和运行速度等因素是保证大丝束炭纤维充分展开和浸 润的技术关键。
2.
In thispaper the PAN precursors for production for large tow carbon fibers in ACODIS UK Ltd.
本文介绍英国阿考迪斯公司研制生产的大丝束碳纤维用聚丙烯腈原丝，包括技术路线工艺流程等，并指出发展方向与趋势。
3.
Thecharacteristics for producing large tow carbon fiber, their trade marks, specifications,properties and application, as well as market by application from 1996 to 2001 isemphasized.
本文简介炭集团公司概况，重点介绍大丝束碳纤维生产特点、其牌号、规格、性能与应用，以及１９９６～２００１年按应用的大丝束碳纤维市场。
2) yarn counts
丝束大小
1.
The effect of the yarn counts on mechanical properties of the woven carbon cloth with two types of tow(1 k and 3 k)reinforced silicon carbide (C/ SiC) composites was investigated by the mechanical tests.
通过对2种丝束大小平纹机织的碳纤维布增强SiC(C/SiC)复合材料的力学性能实验,研究了纤维束丝束大小(1k和3k)对复合材料力学性能的影响。
3) PAN tow
腈纶大丝束
1.
Study on preoxidation of dry or wet-spun PAN tow;
干纺与湿纺腈纶大丝束预氧化工艺研究
4) large-tow carbon fiber
大丝束碳纤维
1.
The prepreg of modification epoxy resin / large-tow carbon fiber had been analyzed using scanning electron microscope, The modification epoxy resin / large-tow carbon fiber composites capability including mechanical、toughness、hot-wet and medium had .
用红外光谱分析仪、差式扫描量热仪、动态热机械分析仪等设备分析了改性后的树脂基体，用电子扫描电镜对改性环氧树脂体系／大丝束碳纤维预浸料进行了扫描电镜分析，测试了改性环氧树脂体系／大丝束碳纤维复合材料的常规力学强度、韧性性能、耐湿热性能以及耐介质性能。
5) tow
[英][təu] [美][to]
丝束
1.
Using high-shrinkage acrylic tow with boiling water shrinkage 29% and regular acrylic tow as raw materials,the high-shrinkage acrylic bulky top was produced via stretch-breaking technology on a Seydel-679 stretch breaking machine.
以沸水收缩率为29%的高收缩腈纶丝束和普通腈纶丝束为原料,在Seydel-679拉断机上采用拉断法生产高收缩腈纶膨体毛条,探讨了其制条工艺。
2.
Through study on the filtration of cellulose acetate dope, an equal-effect filtration mathematic model was proposed to carry out fine filtration of the spinning dope, reducing the ends-out ratio to less than 0.
通过对非牛顿高粘度二醋酸纤维素浆液过滤的研究,建立了等效过滤模型,实现了浆液的精细过滤,反映过滤质量的丝束断头率降到了0。
3.
This paper introduces the cigarette-ping-en-mouth scrap in tow bar recovery process and equipment.
本文简要介绍了卷烟聚丙烯嘴棒废品中丝束回收工艺和设备。
6) large tow carbon fiber prepreg
大丝束碳纤维预浸料
1.
The prepreg technology development is introduced in this paper, which is adapted to the low cost making technology of composite, It included: storable prepreg at room temperature; low temperature curing prepreg; large tow carbon fiber prepreg; Fast curing prepreg.
本文根据复合材料低成本制造技术,介绍了预浸料技术的新进展,包括可常温储存的预浸料;低温固化高温使用的预浸料;大丝束碳纤维预浸料和快速固化预浸料。
补充资料：丝束
分子式：
CAS号：
性质：化学纤维纺丝后，由相当多的单股长丝集合成为丝束。由于用途不同可分下列加工方法：(1)纺丝后集成丝束，经拉伸、上油、卷曲、干燥定型后，切成短纤维；(2)醋酯纤维或丙纶经纺丝、集束、拉伸、卷曲后，以长丝束制作香烟滤嘴棒；(3)经纺丝、拉伸定型后长丝束，再经制条机直接制成毛条(tow-to-top)，用于毛纺厂纯纺或混纺；(4)纺丝后经牵切纺成粗纱条。
CAS号：
性质：化学纤维纺丝后，由相当多的单股长丝集合成为丝束。由于用途不同可分下列加工方法：(1)纺丝后集成丝束，经拉伸、上油、卷曲、干燥定型后，切成短纤维；(2)醋酯纤维或丙纶经纺丝、集束、拉伸、卷曲后，以长丝束制作香烟滤嘴棒；(3)经纺丝、拉伸定型后长丝束，再经制条机直接制成毛条(tow-to-top)，用于毛纺厂纯纺或混纺；(4)纺丝后经牵切纺成粗纱条。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条