说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 二次热压
1)  two-time hot pressing
二次热压
1.
Influence of two-time hot pressing on microstructure and properties of TiB_2-Cu-Ni composite via combustion synthesis;
二次热压烧结对燃烧合成TiB_2-Cu-Ni复合材料组织及性能的影响
2.
On the basis of high temperature compression, the two-time hot pressing sintering was conducted at 1050℃,1090℃ and 1150℃ .
分别在 10 5 0℃、 10 90℃、 115 0℃对复合材料进行二次热压烧结 ,详细研究了工艺参数对TiB2 4 0Cu复合材料二次热压变形、组织特征及力学性能的影响。
2)  technology with hot pressings twice
二次热压工艺
3)  reheating [英][ri:'hi:t]  [美][ri'hit]
二次加热
1.
Reheating Process for the Semi-solid A356 Alloy;
半固态A356合金的二次加热工艺研究
2.
Detection of the Reheating State of Semisolid Hypoeutectic Al-Si Alloy;
半固态亚共晶铝硅合金二次加热状态检测
3.
Effect of In-situ Al_2O_3 Particles on Reheating Microstructure of Near-liquidus Casting Al-Cu Alloy
原位Al_2O_3颗粒对近液相线铸造Al-Cu合金二次加热组织的影响
4)  Reheat [英][,ri:'hi:t]  [美][ri'hit]
二次加热
1.
Relationship of Microstructure and Toughness Index of Reheated High Grade Pipeline Steels;
高钢级管线钢二次加热后韧性指标变化规律及其与组织关系探讨
2.
Study of reheated microstructures of semi-solid ingots of SiC_p/2024 composites;
SiC_p/2024复合材料半固态坯二次加热组织的研究
3.
Effect of reheating on toughness index and microstructure of high grade pipeline steels;
二次加热对高钢级管线钢韧性及其组织的影响
5)  remelting
二次加热
1.
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
利用电阻炉加热,采用电子显微镜及图象分析仪,研究了近液相线铸造A356铝合金在二次加热过程中的组织变化。
2.
The remelting temperature field of semi-solid A356 alloy was simulated using ANSYS software.
利用大型有限元分析软件,模拟计算了半固态A356铝合金的二次加热温度场·结果表明:在给定铝合金二次加热温度的前提下,线圈电流密度与加热时间成反比,与试样内、外温差大小成正比·当用总截面为40mm×130mm的宽线圈加热时,合适的线圈的电流密度为0 5×107A/m2和0 6×107A/m2,此时铝合金内外温差分别为8 6℃和9 8℃,加热时间分别为31min和21min;当用总截面为20mm×130mm的窄线圈加热时,合适的电流密度分别为0 8×107A/m2和0 85×107A/m2,此时铝合金内外温差分别为8 6℃和8 9℃,加热时间分别为33min和30min·本研究为A356合金半固态生产工业化提供理论指导
3.
The casting microstructures are gradually turned into equiaxed grains by remelting.
为了研究半固态金属的成型规律,采用电子显微镜及图像分析仪,研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。
6)  secondary thermal recovery
二次热采
补充资料:输出反馈(见线性二次型次优控制)


输出反馈(见线性二次型次优控制)
output feedback

  3h日c卜口fon以以{输出反馈型次优控制。(output王eedbaek)见线性二次
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条