内六方,inner hexagon,在线英语词典,英文翻译,专业英语

1) inner hexagon

内六方

To analyze the forming mechanism of the inner hexagon and triangle shape.

对中厚壁钢管在微张力减径过程中出现的内孔不规圆现象进行了研究,分析了内六方和内三角的形成机理,根据生产实践经验,建立了椭圆度方程,并提出了消除内不规圆的措施。

2) Internal hexagonal defect

内六方缺陷

3) inner hexagonal bolt

内六角螺钉

Adopting the method of combining the Oyane Ductile Fracture Criteria with Finite Element Analysis(FEA) to analyze the deformation course of inner hexagonal bolt with 35K steel,the position for hexagonal bolt head to be easy broken and the cause are discussed,the crazing situations of inner hexagonal bolt in cold heading are forecasted,the results accord with practical breaking situation.

采用Oyane韧性断裂准则与有限元分析相结合的方法,对以35K为材料的内六角螺钉的成形过程进行分析,探讨内六角螺钉头易于开裂的部位及其原因,预测内六角螺钉冷镦过程中的开裂情况,结果与实际开裂情况相符合。

4) hexagon socket head bolts

内六角螺栓

This paper introduces analysis on cracks in hexagon socket head bolts of ML35(B) cold heading steel wire rod which is made in Hangzhou Iron & Steel Group Company.

杭州钢铁集团公司生产的ML35(B)冷镦钢盘条,在镦制内六角螺栓时发生了开裂现象。

5) inter-hexagon punch

内六角冲头

On the basis of service conditions and failure forms of the inter-hexagon punches,some technology measures such as die materials optimization,strengthening and toughening treatment as well as surface treatment of QPQ were provided,and a type of high performance inter-hexagon punch was also developed.

在内六角冲头服役条件及失效形式分析的基础上,提出了模具材料优化、强韧化处理及QPQ表面处理等技术措施,研制出了一种高性能的内六角冲头。

6) Allem screw wrench

阿兰内六角扳头

参考词条

内六角凹端紧定螺钉内六角凹头螺钉塞内六角花形半沉头螺钉内六角花形沉头螺钉内六角花形盘头螺钉内六角花形圆柱头螺钉内六角平端紧定螺钉内六角圆端无头螺钉内六角圆柱端紧定螺钉内六角圆柱端无头螺钉内六角圆柱头轴肩螺钉内六角锥端紧定螺钉无头内六角尖锥端螺钉无头内六角平锥端螺钉无头内六角全环端螺钉内-六氢-8-羟基-2,6-亚甲基-2H-喹嗪-3(4H)-酮 HBV感染金莲癖

补充资料：六甲基六乙烯基环六硅氧烷

CAS：18304-82-0
分子式：C18H36O6Si6
分子质量：516.99
中文名称：六甲基六乙烯基环六硅氧烷
英文名称：Hexamethylhexavinylcyclohexasiloxane
2,4,6,8,10,12-hexamethyl-2,4,6,8,10,12-hexavinyl-cyclohexasiloxane

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引内六角凹头管塞内六角埋头螺钉内六角圆柱头螺钉

1) inner hexagon 内六方 1. To analyze the forming mechanism of the inner hexagon and triangle shape. 对中厚壁钢管在微张力减径过程中出现的内孔不规圆现象进行了研究,分析了内六方和内三角的形成机理,根据生产实践经验,建立了椭圆度方程,并提出了消除内不规圆的措施。 2) Internal hexagonal defect 内六方缺陷 3) inner hexagonal bolt 内六角螺钉 1. Adopting the method of combining the Oyane Ductile Fracture Criteria with Finite Element Analysis(FEA) to analyze the deformation course of inner hexagonal bolt with 35K steel,the position for hexagonal bolt head to be easy broken and the cause are discussed,the crazing situations of inner hexagonal bolt in cold heading are forecasted,the results accord with practical breaking situation. 采用Oyane韧性断裂准则与有限元分析相结合的方法,对以35K为材料的内六角螺钉的成形过程进行分析,探讨内六角螺钉头易于开裂的部位及其原因,预测内六角螺钉冷镦过程中的开裂情况,结果与实际开裂情况相符合。 4) hexagon socket head bolts 内六角螺栓 1. This paper introduces analysis on cracks in hexagon socket head bolts of ML35(B) cold heading steel wire rod which is made in Hangzhou Iron & Steel Group Company. 杭州钢铁集团公司生产的ML35(B)冷镦钢盘条,在镦制内六角螺栓时发生了开裂现象。 5) inter-hexagon punch 内六角冲头 1. On the basis of service conditions and failure forms of the inter-hexagon punches,some technology measures such as die materials optimization,strengthening and toughening treatment as well as surface treatment of QPQ were provided,and a type of high performance inter-hexagon punch was also developed. 在内六角冲头服役条件及失效形式分析的基础上,提出了模具材料优化、强韧化处理及QPQ表面处理等技术措施,研制出了一种高性能的内六角冲头。 6) Allem screw wrench 阿兰内六角扳头参考词条内六角凹端紧定螺钉内六角凹头螺钉塞内六角花形半沉头螺钉内六角花形沉头螺钉内六角花形盘头螺钉内六角花形圆柱头螺钉内六角平端紧定螺钉内六角圆端无头螺钉内六角圆柱端紧定螺钉内六角圆柱端无头螺钉内六角圆柱头轴肩螺钉内六角锥端紧定螺钉无头内六角尖锥端螺钉无头内六角平锥端螺钉无头内六角全环端螺钉内-六氢-8-羟基-2,6-亚甲基-2H-喹嗪-3(4H)-酮 HBV感染金莲癖补充资料：六甲基六乙烯基环六硅氧烷 CAS：18304-82-0 分子式：C18H36O6Si6 分子质量：516.99 中文名称：六甲基六乙烯基环六硅氧烷英文名称：Hexamethylhexavinylcyclohexasiloxane 2,4,6,8,10,12-hexamethyl-2,4,6,8,10,12-hexavinyl-cyclohexasiloxane 说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com