1) clad steel plate tower
复合钢板塔
1.
Considering material characteristics of clad steel plate tower,the procedure features:baiting,rolling circle,checking circle and welding should be emphasized in the manufacturing process of clad steel plate tower.
从复合钢板材料特性出发 ,论述复合钢板塔在制造过程中应着重注意下料、滚圆、校圆、焊接等工序特点。
2) compound tray
复合塔板
1.
Hydrodynamic characteristics of continuously tridimensional mass-transfer compound tray;
立体连续传质复合塔板流体力学特性
2.
The gas-liquid performance of the compound tray with free area 20% and 25% respectively was investigated by multi-path conductometer.
采用多路电导测试系统,在直径500mm的冷模塔内,以空气-水为试验物系,研究了开孔率20%和25%复合塔板上的气液运动规律。
3.
The study on the hydraulics of compound tray was conducted with air-water system in a 500 mm inner diameter column and in a 300 mm inner diameter column in order to improve the turndown ratio and capacity of the compound tray.
在内径为 5 0 0mm和 30 0mm的塔内 ,以空气 水为物系 ,测定了不同结构 (浮阀 筛孔穿流板、非均匀开孔率穿流板、双孔径穿流板 )的穿流板与 2 5 0Y规整填料组成的各种复合塔板的流体力学性能。
3) plural Tray
复合塔板
1.
As a large equipment used in flue gas desulfuration trechnique,Plural Tray,which operates in the spray regime and consists of large-holed sieve tray and structured packing,has been developed.
在前文工作的基础上进一步研究了同时具备大孔径和高开孔率条件的复合塔板 ,研究了操作变量和流体的物理性质对该复合塔板流体力学性能的影响 。
5) composite plate
复合钢板
1.
Deformation Induced In Situ Composite Plate Manufactured by Cold Rolling with Multiple Pass;
多道次冷轧法制备内生复合钢板
6) clad steel plate
复合钢板
1.
Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
2.
The procedure welding alloy clad steel plate is different from welding solid metal.
焊接复合钢板时,对焊接接头的坡口形式有特殊要求,若坡口形式不当,当先焊接基层时,焊缝金属中可能熔入复层合金元素导致基层焊缝脆化;当先焊接复层时,焊缝金属中可能熔化基层使焊缝金属稀释,降低复层的耐蚀性。
3.
The particularity of welding technology of clad steel plate is due of the difference of the chemical composition of the clad steel plate and experimental results show that the welding sequences and the selection for the welding consumables will depend on the approachable side as well as the plate thickness of clad steel plate.
由于复合钢板化学成分的差异,决定了复合钢板焊接工艺的特殊性。
补充资料：钢板网塔板
分子式：
CAS号：
性质：又称钢板网塔板或Perform塔板，是由压延金属薄板制成。板上开有定向切孔，孔宽度为2～5mm，倾角为10°～60°，塔板上分成若干区，每一区又按塔板上定向切口的方向分成两部分，两部分的斜孔方向互成90°。塔板上装有倾斜的挡沫板，开有斜孔，挡沫板底部与塔板之间具有一定的间隙，相邻两块挡沫板之间的距离为300～400mm。这种塔板有压力降较低，处理能力大等优点，但弹性及效率较低，能适用于真空操作。
CAS号：
性质：又称钢板网塔板或Perform塔板，是由压延金属薄板制成。板上开有定向切孔，孔宽度为2～5mm，倾角为10°～60°，塔板上分成若干区，每一区又按塔板上定向切口的方向分成两部分，两部分的斜孔方向互成90°。塔板上装有倾斜的挡沫板，开有斜孔，挡沫板底部与塔板之间具有一定的间隙，相邻两块挡沫板之间的距离为300～400mm。这种塔板有压力降较低，处理能力大等优点，但弹性及效率较低，能适用于真空操作。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条