1) aluminium alkoxide
醇铝
1.
The synthesis of furan phenol through cyclization were studied, catalyzed by aluminium alkoxide and the affect of the catalyst weight against the selection of furan phenol and the feeding in or distilling out of the alcohol against the reaction yield of product.
采用醇铝作为呋喃酚环合反应催化剂,研究催化剂用量与呋喃酚选择性的关系,以及在反应体系中添加或采出醇对反应收率的影响。
2) aluminum isopropoxide
异丙醇铝
1.
A Removal of Trace Silicon Impurity from Aluminum Isopropoxide;
异丙醇铝中痕量硅杂质分离纯化研究
2.
Ring-opening polymerization of ε-caprolactone(ε-CL) on the surface of hydroxylated biaxially oriented polypropylene(BOPP) film was initiated by aluminum isopropoxide in a sequential two-step method and in a one-step method.
以异丙醇铝为催化剂,采用一步法和两步法在聚丙烯膜表面接枝聚己内酯。
3) aluminium isopropoxide
异丙醇铝
1.
Research on removal of trace iron in aluminium isopropoxide by forming involatile chelate iron;
螯合-蒸馏法脱除异丙醇铝中痕量铁研究
2.
The homogeneous hydrogen transfer of acrolein to allyl alcohol was carried out with aluminium isopropoxide as catalyst.
采用异丙醇铝为催化剂,丙烯醛与异丙醇进行均相氢转移反应合成烯丙醇,对催化剂的再利用及催化剂的失活原因进行了研究。
3.
The catalysis of iodine was discussed in detail in the synthesis of aluminium isopropoxide.
详细探讨了直接反应法制备异丙醇铝过程中单质碘对铝与异丙醇反应的催化机理,得出碘的催化作用在于:碘首先与铝反应生成A lI3,然后A lI3醇解生成异丙醇铝和H I,同时H I与铝反应又生成A lI3和H2。
4) Mg and Al alkoxide
镁、铝醇盐
5) Al(OR)_3
有机醇铝
1.
In this paper,stable,uniform and transparent Al_2O_3 sol is prepared by sol-gel process with the aid of hydrolysis of Al(OR)_3, and nano-scaled antistatic finishing agent is compounded with it,and is applied to antistatic finishing on PET ornamental fabric by pad-dry-cure and the processing conditions of finishing of the influences on the effect of antistatic finishing are analyzed.
通过用有机醇铝水解的溶胶-凝胶法制备出稳定、均一、透明的纳米氧化铝溶胶,将其复配成纳米抗静电整理剂,通过轧-烘-焙工艺,应用于涤纶装饰织物抗静电整理,并分析了整理工艺条件对整理效果的影响。
6) aluminum isoamyloxide
异戊醇铝
1.
The simple method of one step synthesis of isoamyl isovalerate from isovaleraldehyde under aluminum isoamyloxide catalyst and ZnCl\-2 co catalyst was studied.
在自制的异戊醇铝催化剂和无水氯化锌助催化剂作用下 ,以异戊醛为原料一步合成出异戊酸异戊酯。
补充资料:2-丙醇铝
分子式:C9H21AlO3
分子量:204.25
CAS号:555-31-7
性质:吸湿性白色固体。熔点128-132℃,沸点138-148℃(1.33kPa),相对密度(20/4℃)1.035。溶于乙醇、异丙醇、苯、甲苯、氯仿、四氯化碳和石油烃。遇水分解。
制备方法:由异丙醇和铝在氧化铝催化下反应而得。原料消耗定额:异丙醇1255kg/t、铝166kg/t。
用途:用作脱水剂、催化剂和防水剂的原料。
分子量:204.25
CAS号:555-31-7
性质:吸湿性白色固体。熔点128-132℃,沸点138-148℃(1.33kPa),相对密度(20/4℃)1.035。溶于乙醇、异丙醇、苯、甲苯、氯仿、四氯化碳和石油烃。遇水分解。
制备方法:由异丙醇和铝在氧化铝催化下反应而得。原料消耗定额:异丙醇1255kg/t、铝166kg/t。
用途:用作脱水剂、催化剂和防水剂的原料。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条