1) high-carbon chrome alloy
高碳铬铁合金
1.
The X-ray spectrofluorimetry is adopted in determining chrome,silicon and phosphorus of high-carbon chrome alloy.
通过选择合适的制样条件,确定仪器最佳参数,建立工作曲线,对高碳铬铁合金进行测定。
2) high purity Fe-P-Cr-C alloy
高纯铁磷铬碳合金
3) high chromium ferroalloy
高铬铁合金
1.
In this paper, the effect of Ni, Cu and Cr/C on microstructure and properties of high chromium ferroalloy is explored by the method of contrast experiment, and the development of a new high chromium ferroalloy with wear and corrosion resistance is finished.
本文利用对比实验的方法探讨了不同质量分数的Ni、Cu以及Cr/C对高铬铁合金显微组织和性能的影响规律,完成了新型耐磨耐蚀高铬铁合金的研发。
4) Fe-Cr-C alloy
铁-铬-碳合金层
1.
Fe,Cr,C powder mixtures were employed to coat the surface of a low carbon steel substrate,and the Fe-Cr-C alloy layer was prepared by electron beam scanning in vacuum condition which was heated treatment at 800 ℃ for 2.
以铁、铬、碳粉为原料,将其混合后涂覆在低碳钢基材表面,采用真空电子束扫描方式制备了铁-铬-碳合金层,并对其进行了800℃×2。
5) High-carbon ferrochrome
高碳铬铁
1.
It analyzed interrelations among the carbon, silicon and sulphur in high-carbon ferrochrome, slag basicity and furnace temperature, coke's sulphur influenced on desulphurization are also discussed, many effective measures are taked for lessening sulphur content in high-carbon ferrochrome.
文章从理论上分析了高碳铬铁合金中碳、硅、硫含量的相互关系,炉渣碱度对合金含量的影响,提高炉温对 炉渣脱硫的作用以及焦炭含硫量的影响等。
6) high carbon ferrochrome
高碳铬铁
1.
It analyses the changeable TiO_2 content in chrome ore and the structural form,the balance of Ti,the reaction mechanism of Ti and its existence form in alloys,the affect factor of Ti content in alloys,and benefits and control methods during the process of smelting low titanium high carbon ferrochrome.
分析了低钛高碳铬铁生产过程中铬矿TiO_2含量变化与结构形式,冶炼过程中Ti的平衡、反应机理和在合金中的存在形式,合金含Ti量高低的影响因素,以及效益与控制方法。
2.
It introduces technological condition and result of smelting high carbon ferrochrome with Xinjiang's high melting point and low grade chromes.
介绍了使用新疆高熔点、低品位铬矿冶炼高碳铬铁的工艺条件和结果,实践证踢通过合理地控制操作,可以得到较理想的技术经济指标。
3.
Based on the principle and characteristics of medium frequency furnace, analysis on physical and chemical performance of liner material , better technological economic indexes and benefits of adaptation to 2 tons medium frequemcy furnace for resmelting high carbon ferrochrome are realizde by pilot production and industrialized production.
采用2 t中频炉重熔高碳铬铁,根据中频炉的原理及特点,对炉衬材料的物化性能进行了分析,通过试生产和工业化生产,取得了较好的技术经济指标和经济效益。
补充资料:生产微碳铬铁的4000kVA大型真空炉(吉林铁合金厂)
生产微碳铬铁的4000kVA大型真空炉(吉林铁合金厂)
生产微碳铬铁的4000k、厂A大型真空炉(吉林铁合金厂)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条