说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 炭粒
1)  Char particle
炭粒
1.
A mathematical model for the combustion of a porous coal char particle with the outer lane reaction (CO+12O 2CO 2) is founded in this paper.
本文提出了具有空间反应的多孔单炭粒燃烧的数学模型,该模型的计算的结果与实验值基本相符。
2)  char particle
焦炭颗粒
1.
Modeling the gasification characteristics of char particle under kinetics control
动力学控制下焦炭颗粒气化特性的模型研究
2.
Pore structure and its evolution have significant effect on char particle gasification behavior;the evolution of specific surface area for instance has the same transformation trend with reaction rate.
孔结构及其变化对焦炭颗粒的气化行为有重要的影响,如颗粒的比表面积变化与反应速率有相同的变化趋势。
3)  coke size
焦炭粒度
1.
According to the features of coke bed heat transfer in a coke dry quenching(CDQ)chamber,an experimental setup of CDQ chamber heat transfer was established to test the primary parameters such as coke size and cooling gas flow.
根据干熄炉内焦炭床层换热的特点,建立了固定床干熄炉传热模拟实验装置,针对焦炭粒度、冷却气体流量等关键参数进行了实验研究。
4)  bamboo charcoal masterbatch
竹炭母粒
1.
In this paper, bamboo charcoal masterbatch and polyester chip were used as raw materials to produce three-dimensional crimp staple hollow fiber by using conventional polyester staple fiber production equipment.
以竹炭母粒、聚酯切片为原料,在普通涤纶短纤维纺丝设备上纺制三维卷曲中空竹炭涤纶短纤维,并对其干燥、纺丝成形、拉伸、热定型等工艺进行了探讨。
5)  Granular coke
焦炭颗粒
1.
Granular coke reinforced pitch-based carbon composites (CRPCC) with high density and low cost were fabricated by a new mould pressing and semi-carbonization technology.
采用新型模压半炭化成型工艺制备出高密度、低成本的焦炭颗粒增强沥青基炭复合材料。
6)  adjustment of coke size
焦炭整粒
补充资料:合成纤维色母粒用炭黑
CAS:1333-86-4
分子式:C
分子质量:12.011

中文名称:炭黑;合成纤维色母粒用炭黑;木丝,刨花;炉法碳黑;灯墨

英文名称:Carbon black;acetylene black;aroflow;arogen;arotone;arovel;arrow;atlantic

性状描述:纯黑色的细粒或粉状物。不溶于水、酸和碱。能在空气中燃烧。其主要成分是元素碳,还含有少量的氢;氧;硫和灰分。炭黑粒子近似球形,粒径介于10-500μm间。许多粒子常熔结或聚结成三维键枝状或纤维状聚集体。颜色;粒径;相对密度,均随所用原料和生产方法的不同而有所差异。槽法炭黑偏向酸性,炉法炭黑偏向碱性。具有较高的绝热能力。

生产方法:炭黑是最古老的工业产品之一。我国在古代就用植物油不完全燃烧制取颜料炭黑。

1872年,美国首先以天然气为原料用槽法生产炭黑,主要用作着色剂。

1912年莫特发现炭黑对橡胶的补强作用之后,炭黑工业才得到迅速发展,相继发展了多种工艺方法。

目前,油炉法是效率最高;经济效益最好的方法,油炉黑的产量已占炭黑总量的70-90%。主要有炉法、槽法、热裂法三种。

用途:1.橡胶工业 作为补强填充剂。

2.油漆油墨工业 用作油漆油墨的着色颜料。

3.黑色纸张制造 如照相材料的包装用纸和无线电器材使用的具有高导电性炭黑制造的黑色纸制品。

4.复写纸和打字带 用于要求深黑的颜色并能存留在载体上。

5.塑料着色、墨水、留声机唱片、鞋油、油漆布、皮革涂料、有色水泥、电极、电刷、干电池等方面。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条