1) slurry
[英]['slʌri] [美]['slɝɪ]
淤浆
1.
Study on Polyethylene Slurry Polymerization with Ziegler-Natta Support Catalyst
一种Ziegler-Natta载体催化剂用于乙烯淤浆聚合的研究
2.
The rationality for adopting slurry external circulation technology in capacity expansion of slurry polyethylene plant was expounded via comparison of different methods for removal of polymerization heat.
通过分析不同聚合热的撤除方式,阐述了淤浆法聚乙烯装置扩容改造选择浆液外循环技术的合理性,并通过对该技术关键工艺参数做必要的计算来进行论证。
2) slurry polymerization
淤浆聚合
1.
The isotactic polypropylene prepared under the supercritical conditions was compared with that obtained by a conventional slurry polymerization with respect to the isothermal crystallization kinetics by Perkin Elmer differential scanning calorimetry(DSC) and Nikon E600 optical polarimeter(OP) with on-line hot stage,respectively.
采用差示扫描量热法及带热台在线偏光显微镜直接观察法,研究了超临界聚合与常规淤浆聚合这两种不同聚合工艺所制备等规聚丙烯的等温结晶行为。
2.
The Cp 2ZrCl 2/MAO catalyst was evaluated with ethylene slurry polymerization by pilot test.
研究了负载型茂金属催化剂二氯二茂锆 (Cp2 ZrCl2 ) /甲基铝氧烷 (MAO)的模试负载工艺 ,讨论了二氧化硅活化、负载温度、负载时间、MAO和Cp2 ZrCl2 用量对其聚合活性的影响 ,并对该催化剂进行了乙烯淤浆聚合中试评价 ,同时考察了MAO残液的循环利用情况。
3.
Behavior of propylene slurry polymerization was investigated at 15 ℃ , 0.
考察了N催化剂与助催化剂及外给电子体的预络合反应对丙烯淤浆聚合动力学行为的影响。
3) slurry process
淤浆工艺
1.
A novel polyethylene catalyst(BCE catalyst)with high performance for slurry process was prepared by precipitation.
采用浸渍法制备了新型高效淤浆工艺聚乙烯催化剂(BCE催化剂)。
4) slurry process
淤浆法
1.
The commercial application of catalyst NT-1 in production of HDPE with slurry process;
NT-1催化剂在淤浆法HDPE生产中的工业试用
2.
Application of XY~3/H catalyst in slurry process HDPE unit;
XY-H催化剂在淤浆法HDPE装置上的应用
3.
A model of grade transition is presented for the industrial high-density polyethylene (HDPE) continuous slurry process, which has two reactors and one pelletizer connected in series.
针对淤浆法乙烯聚合工艺串联生产过程,以切换时间最短和产生废料量最少为目标,对“反应釜-反应釜-造粒机”三者串联过程,建立了包括后处理过程在内的牌号切换优化模型。
5) fed in slurry
淤浆进料
1.
Study of a new type gas phase ethylene polymerization catalyst fed in slurry was introduced.
研究了新型聚乙烯淤浆进料催化剂的物理性质,考察了催化剂在不同条件下的均聚、共聚和氢调性能,选择了合适的合成工艺,并将其与国外同类催化剂进行了对比。
6) slurry bed
淤浆床
1.
The parameters of the design and operation, and the distribution of the reaction components in the slurry bed reactor have been obtained by computer calculation, and the operating character.
应用三相淤浆床反应器流体力学和甲醇合成基础数据，以ＣＯ、ＣＯ２加氢合成甲醇为独立反应，以ＣＯ、ＣＯ２为关键组分建立三相淤浆床甲醇合成反应器数学模型。
补充资料：淤浆反应器
分子式：
CAS号：
性质：又称淤浆反应器。指催化剂微小固体颗粒悬浮于液体介质中的反应器。液体介质一般是惰性的，仅起悬浮催化剂和利于传热传质作用，反应物可以是气体或液体。
CAS号：
性质：又称淤浆反应器。指催化剂微小固体颗粒悬浮于液体介质中的反应器。液体介质一般是惰性的，仅起悬浮催化剂和利于传热传质作用，反应物可以是气体或液体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条