1) carbon fiber three-dimensional braided composite material
碳纤维三维编织复合材料
1.
Measurement for thickness of carbon fiber three-dimensional braided composite material preforms;
碳纤维三维编织复合材料预制件厚度的测量
2) carbon fabric composites
碳纤维织物复合材料
1.
The carbon fabric composites were prepared by dip-coating of the carbon fabric in a phenolic resin and solidified under pressure.
将碳纤维织物浸渍-涂层酚醛-缩醛粘结剂树脂,加压固化后制备出碳纤维织物复合材料。
2.
The friction and wear of carbon fabric composites and Nomex fabric composites were evaluated using Xuanwu-Ⅲ high temperature friction and wear tester.
用高温玄武三号栓-盘式摩擦磨损试验机研究了碳纤维织物复合材料和 Nomex 纤维织物复合材料的摩擦磨损性能,并用 JSM-5600LV 扫描电子显微镜对其摩擦磨损表面进行了观察和分析。
3) 3-D braided composites
三维编织复合材料
1.
Mathematic model of Weibull probability distribution for 3-D braided composites;
三维编织复合材料威布尔概率分布数学模型
2.
3-D braided composites have high fracture toughness and have not delamination phenomenon under the the condition of impact.
相对于层合复合材料,三维编织复合材料具有高的损伤容限和冲击载荷下不分层的特点。
3.
Fiber inclination model for the description of 3-D textile structural reinforced composites is employed to decompose 3-D braided composites at quasi-microstructure hierarchy.
用三维纺织结构复合材料的纤维倾斜模型在准细观结构层次上分解三维编织复合材料 ,建立与三维编织复合材料具有相同纤维体积含量的单向板细观模型。
4) 3D braided composites
三维编织复合材料
1.
Recent developments of research on predicting stiffness and strength of 3D braided composites were summarized.
综述了近年来国内外对三维编织复合材料的刚度和强度性能预测方法的研究进展。
2.
The research on 3D braided composites can be classified with the research of physical performances based on mesoscopic geometrical model and mechanical properties.
有关三维编织复合材料的理论分析研究归纳为:基于细观结构几何模型的物理性能研究和力学性能研究两部分。
3.
A sort of hexahedral microstructure unit-cell(MUC) geometric model is presented,whose performances are variable,aimed at resolving the troubles of the mechanical analysis about the gradient characteristics in the tubular and 3D braided composites components.
针对工程实际中的管状和空间三维编织复合材料构件中力学性能存在梯度的情况,提出一种性能可以变化的六面体微单元几何模型来描述三维编织复合材料及其构件的几何特性。
5) three-dimensional braided composite material
三维编织复合材料
1.
Research and analysis for acoustic emission source location of three-dimensional braided composite material;
三维编织复合材料声发射源定位分析研究
2.
Feature of acoustic emission and failure analysis for three-dimensional braided composite material under compressive load;
三维编织复合材料压缩损伤声发射特性分析
3.
A perturbational method based homogenization method is formulated to simulate the constitutive properties of three-dimensional braided composite materials by means of finite element models.
本文将基于小参效渐近展开和摄动方法的均匀化理论与有限元方法结合起来应用于三维编织复合材料的弹性本构数值模拟。
6) three-dimensional braided composites
三维编织复合材料
1.
The three-dimensional braided composites, as their a serial of advantages which can not be substituted , and are used in the fields of high technology such as aeronautics and astronautics, etc.
三维编织复合材料由于具有一系列无法替代的优点,被广泛地应用于航空、航天等高科技领域。
补充资料：碳纤维增强银基复合材料
分子式：
CAS号：
性质：以银及银合金为基体，以连续或短切碳纤维增强的银基复合材料。这种银基复合材料保持了银的良好导电导热性能，又由于高强度、高模量的纤维的加入提高了材料的室温和高温强度，弹性模量以及耐烧蚀性，是新一代的触点材料和大电流密度的电刷材料，用于惯性电机和武器系统，电流密度可达500A/cm2。用于电触头具有好的耐烧蚀性。其制造方法是将碳纤维与银粉混合或将碳纤维镀银并按一定方式排列及热压成复合材料或通过挤压成棒材。
CAS号：
性质：以银及银合金为基体，以连续或短切碳纤维增强的银基复合材料。这种银基复合材料保持了银的良好导电导热性能，又由于高强度、高模量的纤维的加入提高了材料的室温和高温强度，弹性模量以及耐烧蚀性，是新一代的触点材料和大电流密度的电刷材料，用于惯性电机和武器系统，电流密度可达500A/cm2。用于电触头具有好的耐烧蚀性。其制造方法是将碳纤维与银粉混合或将碳纤维镀银并按一定方式排列及热压成复合材料或通过挤压成棒材。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条