1) coagent
[英][kəu'eidʒənt] [美][ko'edʒənt]
交联助剂
1.
NR latex cured with different peroxides curing systems was made, and an effect of different varieties and different addition of coagents on curing efficiency was discussed.
选用不同的过氧化物硫化体系制得硫化天然胶,在此基础上探讨了不同种类及用量的交联助剂和热处理温度对硫化效果的影响。
2.
The effects of various coagent on property of hydrogenated nitrile butadiene rubber(HNBR)blends crosslinked by peroxide,and fillers on service lifetime of the twin lip seals were studied.
研究了不同交联助剂的过氧化物硫化体系对氢化丁腈橡胶(HNBR)胶料性能的影响,以及填充补强剂对制品使用寿命的影响。
2) assistant crosslinker
助交联剂
1.
Polypropylene (PP) was modified by peroxide initiator and assistant crosslinker.
采用过氧化物引发剂与助交联剂组合对聚丙烯(PP)进行交联改性。
3) active curing coagent
活性交联助剂
1.
The effects of active curing coagent N,N′-bis(furfurylidene)acetone(VP-4) on the curing characteristics,mechanical properties,crosslinking densities,hot air aging resistance as well as compression set of EPDM cured by peroxide(DCP) were studied.
研究了活性交联助剂N,N′-双亚糠基丙酮(VP-4)对过氧化物(DCP)硫化的三元乙丙橡胶(EP-DM)的硫化特性、力学性能、耐热空气老化性能、交联密度和压缩永久变形等的影响。
4) epoxy cross-linking assistant agent
环氧交联助剂
1.
Study on the epoxy cross-linking assistant agent in the protective coatings on the metallic yarn;
金银丝保护层涂料中环氧交联助剂作用的研究
5) allyl based cocrosslinking agent
烯丙基类助交联剂
1.
The structure, properties (including active oxygen content and decomposition character), usage and synthetic methods of organic peroxide crosslinking agents such as α,α-bis(tert-butylperoxy)diisopropyl benzene, tert-butyl hydroperoxide, di-tert-butyl peroxide as well as allyl based cocrosslinking agents i.
系统介绍了有机过氧化物交联剂如无臭味交联剂双BP、叔丁基过氧化氢和二叔丁基过氧化物以及烯丙基类助交联剂三烯丙基三聚氰酸酯、三烯丙基异三聚氰酸酯、三羟甲基丙烷三甲基丙烯酸酯和聚三烯丙基异三聚氰酸酯的结构、性质 (包括活性氧量和分解特性 )、用途和合成方法。
6) co-coupling agent
助偶联剂
1.
Meanwhile,according to a model of three-phase-interface,the impact strength and oxygen index of the composites after adding co-coupling agent were investigated,and its results indicated that both the tow properties were further improved.
同时根据三相界面模型理论,研究了加入助偶联剂后复合材料的冲击强度和氧指数的变化情况,结果显示二者均得到进一步地提高。
补充资料：Tm-002硅烷交联剂
1. 化学名称
甲基三乙酰氧基硅烷
2. 物理性质
无色至浅黄色透明液体，较低温度下可转变为白色晶体。易吸湿，可溶于醋酸酐，遇水会交联，并产生醋酸。
3. 技术规格
外观 无色至浅黄色透明液体，或白色晶体
密度（r25）g/cm3 1.1750~ 1.1800g/cm3
含量（%） ≥95
折射率(n 25d) 1.4050±0.0005
沸点（℃） 110-112/17mmhg
熔点（℃） 40.5
cl-（%） ≤0.1
4. 用途
本品主要用作室温硫化硅橡胶的交联剂。
5. 包装与储运
塑料桶包装，每桶净重10kg、25kg、100kg、180kg。密封储存于阴凉、干燥通风处，防潮防水，远离火种、热源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条