1) electroless nanometer composite coating
纳米复合材料镀层
1.
The Ni-P-Fe_2O_3 electroless nanometer composite coating has been prepared.
采用复合化学镀方法制备了镍-磷-氧化铁纳米复合材料镀层。
2.
By means of studying the composition and deposition conditions(including concentration,time,temperature and pH) of Cu-Sn-P-ZrO2 electroless nanometer composite coating,the coating was obtained,which has the proper of metallic luster and low porosity.
通过对纳米复合材料镀层Cu-Sn-P-ZrO2的制备条件(包括浓度、时间、温度及pH)的研究,制得了光亮、致密且孔隙率低的镀层。
2) nanometer composite loyer
纳米复合材料层
3) nano-composite coating
纳米复合镀层
1.
CeO2-SiO2/Ni-W-P nano-composite coatings were prepared on the surface of carbon steel by pulse co- deposition of Ni, W, P, nano-CeO2 and nano-SiO2 particles.
为了探讨脉冲参数对CeO2-SiO2/Ni-W-P四元纳米复合镀层性能的影响,采用脉冲沉积的方法,在普通碳钢表面制备了CeO2-SiO2/Ni-W-P纳米复合镀层。
2.
Current research progress of Ni-based ZrO2 nano-composite coatings was reviewed.
综述了Ni-ZrO2纳米复合镀层的研究现状,重点阐述镀层的沉积机理。
3.
The effects of cathodic current density, bath temperature and electrode distance on the micro-hardness of Ni-SiC nano-composite coating were investigated in the present paper.
针对镀液中阴极电流密度、镀液温度以及极板间距,对Ni-SiC纳米复合镀层显微硬度的影响进行了研究。
4) nanocomposite coatings
纳米复合镀层
1.
Study on Characterization and Mechanisms of Ni-ZrO_2 Nanocomposite Coatings by Pulse Electroplating Technology;
脉冲电沉积Ni-ZrO_2纳米复合镀层的制备、表征及机理研究
2.
Studies on Characterization and Mechanism of Au-based Nanocomposite Coatings Prepared by Pulse Electroplating Technology;
脉冲电沉积金基纳米复合镀层的制备、表征及机理研究
3.
A novel method for fabricating nanocomposite coatings was investigated——a high magnetic field was imposed on plating bath instead of mechanical stirring for preparation nanocomposite coatings in direct current electroplating process.
研究了一种制备纳米复合镀层的新方法——在直流电镀过程中对电镀液施加强磁场以代替机械搅拌来制备Ni/Al_2O_3纳米复合镀层,考察了镀层的结构,并对镀层性能进行了研究。
5) Nano composite coating
纳米复合镀层
1.
Microstructure and properties of cathode electrodeposited Ni-SiC nano composite coatings on MB8 magnesium alloy;
MB8镁合金阴极电沉积Ni-SiC纳米复合镀层微观结构及性能
2.
The nano composite coating of n ZrO 2/Ni prepared by electro brush plating and its contact fatigue property was investigated.
采用电刷镀技术制备了n ZrO2 /Ni纳米复合镀层 ,研究了镀层的接触疲劳性能。
6) nano-composite electrodeposits
纳米复合电镀层
1.
The corrosion resistance of the Ni-ZrO_2 nano-composite electrodeposits in 10%HCl and 10%H_2SO_4 solutions respectively was studied by massloss measurement.
采用电镀工艺制备了纯镍电镀层和Ni-ZrO2纳米复合电镀层,对纯镍电镀层和Ni-ZrO2纳米复合电镀层分别在10%HCl和10%H2SO4溶液中的耐蚀性进行了对比研究,用SEM对各种电镀层腐蚀后的表面形貌进行了观察。
补充资料：纳米复合材料
分子式：
CAS号：
性质：包括三种形式，即由两种以纳米尺寸的晶粒进行复合或两种以上纳米厚薄的薄膜交替叠层或纳米粒子和薄膜复合的复合材料。前者由纳米尺寸的晶粒具有很大的表面能，同时晶粒之间的界面区已经大到超常的程度，所以使一些通常不易固溶、混溶的组分有可能在纳米尺度上复合，从而形成新型的金属/陶瓷、陶瓷/陶瓷复合材料。这些复合材料由于存在纳米尺寸将就可望明显改善复合材料的韧性和耐温性。另外在纳米尺度上形成的无机/无机和无机/有机复合材料则有可能形成性能优异的新一代功能复合材料。
CAS号：
性质：包括三种形式，即由两种以纳米尺寸的晶粒进行复合或两种以上纳米厚薄的薄膜交替叠层或纳米粒子和薄膜复合的复合材料。前者由纳米尺寸的晶粒具有很大的表面能，同时晶粒之间的界面区已经大到超常的程度，所以使一些通常不易固溶、混溶的组分有可能在纳米尺度上复合，从而形成新型的金属/陶瓷、陶瓷/陶瓷复合材料。这些复合材料由于存在纳米尺寸将就可望明显改善复合材料的韧性和耐温性。另外在纳米尺度上形成的无机/无机和无机/有机复合材料则有可能形成性能优异的新一代功能复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条