说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 选择性激光烧结设备
1)  Selective Laser Sintering
选择性激光烧结设备
1.
Research on State Detection and Fault Diagnosis for Selective Laser Sintering Device;
选择性激光烧结设备的状态监测与故障诊断技术的研究
2)  selective laser sintering
选择性激光烧结
1.
The influence of properites of powder on selective laser sintering;
粉末材料的物理性能对选择性激光烧结的影响
2.
Fabrication of alloy parts by composite powders via selective laser sintering;
选择性激光烧结复合粉末法制造合金零件
3.
Fabrication of mandibula replica with the data of three-dimensional reconstruction of human mandibula with rapid prototyping by selective laser sintering;
应用选择性激光烧结快速成形方法复制下颌骨三维实体模型
3)  selected laser sintering
选择性激光烧结
1.
Processing Parameters Influencing Precision of the Parts Produced by Selected Laser Sintering
影响选择性激光烧结精度的工艺参数
2.
The injection tooling with the designed optimal conformal cooling channels was fabricated by using the selected laser sintering technique.
利用选择性激光烧结快速制模工艺制造出设计好的具有最优随形冷却水道的注塑模具。
3.
Considering these factors,it finally presents detailed ways to improve the manufacture precision of selected laser sintering.
同时分析了应用过程中影响质量的加工取向、切层厚度、文件格式等影响因素,针对这些影响因素,给出了改善选择性激光烧结制件精度的具体方式。
4)  selective laser sintering(SLS)
选择性激光烧结
1.
The temperature fields of the coated sand selective laser sintering(SLS) process were measured and studied by thermal imager and computer automatic control device.
利用热像仪,通过计算机自动控制,对覆膜砂选择性激光烧结(SLS)过程的温度场进行了测定和研究,避开了使用传统测温方法的各种干扰及缺点。
2.
The working principle of rapid prototyping technology based on selective laser sintering(SLS) was introduced.
介绍了选择性激光烧结(SLS)快速成形技术的工作原理,简述了基于SLS原理的快速成形机的样机研制与调试、烧结工艺实验、存在的问题及解决思路。
5)  Selective Laser Sintering (SLS)
选择性激光烧结
1.
The combination of selective laser sintering (SLS) technique and the conventional casting process provides an efficient way to fabricate some cast parts that cannot be produced with the conventional processing.
选择性激光烧结技术与传统铸造工艺相结合 ,为快速制造某些难以用传统方法获得的铸件提供了有利途径。
6)  SLS
选择性激光烧结
1.
Indirect Selective Laser Sintering(SLS) Technology;
间接法选择性激光烧结技术制备高温特殊复合材料
2.
Characteristic and application of SLS in mould manufacture;
选择性激光烧结技术的特点及在模具制造中的应用
3.
Highly polymerized compound pattern-materials in SLS pattern is un-favorable for dewaxing and easily generating entrapped-slag in the investment castings due to high melting point and high viscosity.
选择性激光烧结(SLS)在熔模铸造中已得到广泛的运用,但其模料为高分子化合物,熔化温度高,熔体粘度大,不利于脱蜡,易使铸件产生夹渣。
补充资料:激光烧结
分子式:
CAS号:

性质: 以激光为热源对粉末压坯进行烧结的技术。对常规烧结炉不易完成的烧结材料。此技术有独特的优点。由于激光光束集中和穿透能力小,适于对小面积、薄片制品的烧结。易于将不同于基体成分的粉末或薄片压坯烧结在一起。利用激光可实现高熔点金属和陶瓷的黏结。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条