1) Ti_3SiC_2/TiB_2
Ti3SiC2/TiB2
1.
Dense Ti_3SiC_2/TiB_2 composites were successfully fabricated by hot-pressed 2TiC/Ti/Si/0.
2Al/TiB2粉为原料,采用热压烧结工艺成功制备了Ti3SiC2/TiB2复合材料。
2) Ti_3SiC_2
Ti3SiC2
1.
High-speed friction characteristics and frictional oxidation behavior of a polycrystal bulk Ti_3SiC_2 were investigated.
研究了高纯度多晶块体Ti3SiC2高速摩擦特性及摩擦氧化行为。
2.
The layered ceramic material Ti_3SiC_2 has a hexagonal crystallographic structure with space group P6_3/mmc.
层状结构的Ti3SiC2陶瓷属于六方晶体结构,空间群为P63/mmc。
3.
With the properties of both metal and ceramics,Ti_3SiC_2 is a kind of layered ternary carbide.
兼有金属和陶瓷性能的Ti3SiC2是一种三元层状碳化物材料,既有象陶瓷那样的高温性能,又有类似金属的导热性和导电性,应用前景十分广阔。
3) Ti 3SiC 2
Ti3SiC2
1.
Ti 3SiC 2 is a novel layered ceramic material, it combines many of the best attributes of both metals and ceramics.
新型层状陶瓷Ti3SiC2 兼有金属和陶瓷的许多优良性能 ,具有高的热导率和电导率 ,易加工 ,同时具有良好的抗热震性、抗氧化性和高温稳定性。
2.
The research progress on the ternary carbide Ti 3SiC 2 is summarized in the present paper.
本文综合介绍Ti3SiC2 的最新研究进展。
4) TiB_2
TiB2
1.
Microstructure and mechanical properties of the in-situ synthesized A356/TiB_2 composites have been investigated.
对原位反应合成TiB2/A356铝基复合材料微观组织和力学拉伸性能进行了研究。
2.
The ceramic composites TiB_2-TiN-(Ni,Mo) with different contents of TiN were fabricated by hot press technology and the mechanical properties were measured.
热压烧结制备了不同TiN含量的复合陶瓷刀具材料TiB2-TiN-(Ni,Mo),对其性能测试表明,随着TiN含量的增加,材料的抗弯强度和断裂韧度逐渐提高,但是材料的硬度在TiN的含量达到40%(体积分数)时却大幅度降低。
3.
TiB_2/B_4C composite ceramic powder was synthesized in situ through co-precipitation mainly with TiCl_4 solution and B_4C powder as raw materials.
采用共沉淀技术,以TiCl4溶液和B4C粉末为主要原料原位合成了TiB2/B4C陶瓷复合粉体。
5) TiB 2
TiB2
1.
Ni-TiB 2 ceramic-metal composite coating is cladded on the surface of 45# steel by CO 2 laser melting a precursor mixture of nickel based alloy powder,boron and titanium powders.
利用激光熔覆技术,使用HL 1500型CO2 激光器在 45#钢表面制备出原位自生成的Ni基金属陶瓷TiB2 涂层。
2.
The synthesis reaction mechanism of TiB 2 during mechanical alloying was also discussed.
采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)及粉体粒度仪研究了Ti33B6 7元素混合粉在机械合金化过程中的结构演变、球磨后粉体的颗粒形态与粒度分布以及热处理对粉体结构的影响,讨论了TiB2 机械合金化合成机制。
3.
Calculating of ΔG T of laser cladding composite coating reaction system shows that TiB 2 is most possibly fabricated, and XRD analysis proves it too.
对激光熔覆复合涂层反应体系标准反应吉布斯自由能 (ΔGT)的计算表明 :TiB2 生成的可能性最大 ,XRD分析也证明了这一点。
6) TiC/ Ti3SiC2
TiC/Ti3SiC2
1.
TiC/ Ti3SiC2 mixed powders were synthesized by mechanical alloying taking Ti, Si and C element powders as the starting materials.
以Ti、Si和C单质粉末为原料,采用机械合金化合成了TiC/Ti3SiC2混合粉体,并用放电等离子烧结球磨粉体制备了致密的TiC/Ti3SiC2陶瓷。
补充资料：bioactive glass-ceramic composite reinforced by SiC whisker
分子式：
CAS号：
性质：由碳化硅晶须与生物活性玻璃陶瓷复合而成的生物陶瓷复合材料。高强度、高弹性模量、无毒的碳化硅晶须在陶瓷基材中弥散分布，使材料中的裂纹相对均匀，裂纹扩展发生转向和分支；外力作用下碳化硅晶须拔出时产生的拔出效应，使复合陶瓷的弯曲强度达460MPa，断裂韧性达4.3MPa·m1/2，维伯尔系数高达24.7，标志着它是可承力的生物陶瓷复合材料。
CAS号：
性质：由碳化硅晶须与生物活性玻璃陶瓷复合而成的生物陶瓷复合材料。高强度、高弹性模量、无毒的碳化硅晶须在陶瓷基材中弥散分布，使材料中的裂纹相对均匀，裂纹扩展发生转向和分支；外力作用下碳化硅晶须拔出时产生的拔出效应，使复合陶瓷的弯曲强度达460MPa，断裂韧性达4.3MPa·m1/2，维伯尔系数高达24.7，标志着它是可承力的生物陶瓷复合材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条