1) working fluid level
动液面
1.
A comparison between the design feature and working principle of a conventional subside pump and those of a subsurface pump with enemy-compensator shows that,while in operation,both the pumps require the work of working fluid level and a certain submergence.
针对国内有人提出的带能量补偿装置的深井抽油泵（简称“补偿泵”）可以不需要动液面进油的观点，在对常规抽油泵和补偿泵结构及工作原理比较后认为，这两种泵抽油时都要动液面作功，都需要有沉没度。
2.
This clue takes reasonable submergence depth as control target and monitors dynamometer card and working fluid level automatically.
为了实现抽油机井或螺杆泵井的生产优化控制,确定了以合理沉没度为控制目标,通过油井示功图和动液面的自动监测和跟踪,进行实时监测的思路。
2) level fluctuation
液面波动
1.
Water model simulation on liquid steel level fluctuation of cast mould at No.2 Steel-making Plant of TISCO;
太钢二炼钢结晶器液面波动的水模拟研究
2.
The behavior of level fluctuation of molten metal in the slab continuous casting mold with static magnetic field has been studied by using Pb-Sn-Bi alloy model.
用Pb-Sn-Bi低熔点合金进行了热模拟实验,研究了在静磁场作用下板坯连铸结晶器内的液面波动行为。
3.
Based on the150 mm×(1 600～3 250) mm wide slab caster mold as investigating object,the level fluctuation in the mold of the wide slab continuous casting was simulated by a three dimensional finite-volume model(VOF) which had been formulated according to the commercial code ANSYS CFX10.
0建立了一个三维有限体积模型,采用多相流的VOF模型对结晶器内保护渣-钢液界面波动进行数值模拟,重点研究了拉速、水口倾角、铸坯断面宽度等工艺参数对结晶器内液面波动的影响。
3) mould level fluctuation
液面波动
1.
Practice on mould level fluctuation control of vertical-bending type caster in refining peritectic steel;
直弧形铸机生产包晶钢结晶器液面波动的控制
2.
Based on experience of 1700 ASP medium-thin slab continuous casting ultra-low carbon steel at An Steel,the factors affecting mould level fluctuation were analyzed systemically,and the corresponding control measures were put forward.
结合鞍钢1700ASP 中薄板坯连铸生产超低碳钢的实践,系统分析了影响结晶器液位波动的因素,并据此采取了相应的控制措施,有效地控制了结晶器的液面波动,提高了铸机的恒拉速率,为鞍钢1700ASP 中薄板坯连铸机的稳态浇铸提供了保证。
4) Liquid Surface Fluctuation
液面扰动
5) Sloshing
[英][slɔʃ] [美][slɑʃ]
液面晃动
1.
Computation of Liquid Sloshing with Free Surface in Container by Dytran Program;
用DYTRAN程序计算贮液容器液面晃动
6) motion of melt surface
液面运动
补充资料：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
药物名称：浓氯化钠注射液
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
英文名：Injection 10% Sodium Chloride
别名：浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名： Injection 10% Sodium Chloride, Hypertonic saline
适应症： 用于脱水症及调节体内水与电解质的平衡。
用量用法： 静脉滴注，临用前稀释，用量与浓度视病情需要而定。
注意事项： 心、肾功能不全者慎用。
规格： 注射剂：１ｇ／１０ｍｌ，本品为氯化钠的高渗灭菌水溶液。
类别：调节水、电解质及酸碱平衡药
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条