说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 掘进动压巷道
1)  work characteristic
掘进动压巷道
2)  tunneling [英]['tʌnəlɪŋ]  [美]['tʌnəlɪŋ]
巷道掘进
1.
Research on Effect of Rockmass Joints and Fissures on Blasting in Tunneling and Its Practice;
岩体节理裂隙对巷道掘进爆破影响的研究与实践
2.
Development of tunneling blasting expert system;
巷道掘进爆破专家系统研究开发
3.
Application of the technique of pentagon hollow cutting-in in tunneling;
五角空心掏槽技术在巷道掘进中的应用
3)  laneway ['leinwei]
掘进巷道
1.
This paper numerically investigated the basic conditions and possibility of the secondary disaster in the coal mine caused by the mine fire in the laneway.
本文采用数值分析方法研究井下掘进巷道内火灾所导致的继发性灾害发生的条件。
4)  excavation roadway
掘进巷道
1.
Analysis of attenuation law and characteristic parameters in excavation roadway during gas explosion;
掘进巷道瓦斯爆炸衰减规律及特征参数分析
2.
Dynamic mathematical model and numerical analysis of gas explosion in excavation roadway;
掘进巷道瓦斯爆炸动态数学模型及数值分析
3.
With the combination of the physical model based on excavation roadway during gas explosion,the gaseous phase detonation parameters are deduced on the conditions of the known gas congestion position,volume and concentration.
结合所建立的掘进巷道瓦斯爆炸的物理模型,当已知瓦斯聚积位置、体积和浓度时,利用Hugoniot方程和Rayleigh方程推导出了瓦斯爆轰参数的公式。
5)  roadway excavation
巷道掘进
1.
The blasting hole arrangement of hard ductility rocks in the roadway excavation is discussed and explosive loading coefficient is determined.
介绍了该矿传统掘进凿岩爆破方法,详细阐述了该矿硬韧性岩的巷道掘进炮眼布设及装药系数的确定。
2.
Study on the roadway excavation rapidly in the low permeability outburst coal seam;
针对在低透气性突出煤层巷道掘进过程中,煤与瓦斯突出综合检测指标经常超限,掘进速度缓慢等问题,提出了深孔预裂控制爆破和巷帮钻孔边抽边掘相结合的综合防突技术,研究了深孔预裂控制爆破技术的作用机理,阐述了深孔预裂控制爆破技术的工艺流程和巷帮钻孔的布置参数。
6)  Heading [英]['hedɪŋ]  [美]['hɛdɪŋ]
掘进巷道
1.
Study on Intensified Ventilation and Flow Field of Jet Ventilation in Heading Face;
掘进巷道强化通风与射流通风流场的试验研究
补充资料:冲击波超压与动压

[解释]:  核爆炸产生的高温、高压火球膨胀,在周围介质中形成连续向外传播的压力脉冲(或冲击波),冲击波阵面传播到空间某点时,超过周围环境大器的压力称超压;空气粒子高速随波阵面运动产生的冲击压力称动压。超压和动压都以帕斯卡(Pa)为主单位。超压随时间的变化取决于爆炸威力、距爆点的距离和爆心周围的介质情况。特定地点的峰值超压一般出现在冲击波阵面到达该点的瞬间,超压在该点的持续时间称为正压作用时间。尔后,该点的压力下降到低于周围压力,称为负压,再逐渐回升到周围压力值。对人员的直接冲击伤,超压为20—29千帕可引器轻度伤;29—59千帕可导致中度伤;59—98千帕可造成重度伤;大于98千帕可造成极重度伤。动压为10—20千帕可造成中度伤;20—39千帕可造成重度伤;大于39千帕可造成极重度伤。动压的推动、抛掷和超压的挤压会造成物体变形和毁坏。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条