1) industrial silicon furnace
工业硅炉
1.
Discussion on the harmonic and the reactive power compensation of industrial silicon furnace(Party A);
论工业硅炉的谐波及无功补偿(上)
2.
The paper describes the harmonic features of industrial silicon furnace in detail in terms of the generation of harmonid,the mathematic modeling of industrial silicon furnace,the influence of harmonic and its limit value.
从工业硅炉谐波的产生、工业硅炉的数学模型、谐波的影响及限值等方面详细地论述了工业硅炉的谐波特征,进一步阐述了工业硅炉的无功特征及其他用电特征,并介绍了工业硅炉的谐波治理与无功补偿的滤波装置。
2) silicon metal electric furnace
工业硅电炉
1.
The paper mainly introduces the fume generation of silicon metal electric furnace as well as the characteristics of electric furnace fume and dust.
介绍了工业硅电炉烟气的产生,电炉烟气和烟尘的特性。
2.
In connection with the problem of high power consumption on domestic silicon metal electric furnace, it describs some issues that are necessary to pay attention in busbar designing and propose some measures which should be adopted in designing the energy-saving busbar.
根据我国工业硅电炉能耗高的问题,从短网设计方面论述了需要注意的问题,并提出了短网节能设计应采取的具体措施。
3) industrial boilers
工业锅炉
1.
Analysis on the measures and key issues of energy-saving and emission reduction technologies in the field of industrial boilers and kilns;
工业锅炉及窑炉节能减排技术途径与关键问题分析
2.
Probe on the contents and methods of the energy saving monitoring of industrial boilers;
工业锅炉节能监测内容及方法的探讨
3.
Intelligent optinum seeking for burning efficiency of industrial boilers;
工业锅炉燃烧效率的智能寻优
4) industrial furnace
工业炉
1.
Computer-aided design of the brasque by spraying with refractory fiber used in a petrochemical industrial furnace;
石油化学工业炉耐火纤维喷涂炉衬的计算机辅助设计
2.
The status quo and developing of industrial furnaces in China;
我国工业炉的现状与发展
5) industrial furnace
工业炉窑
1.
The fiber is widely used in the industrial furnace liner.
介绍了陶瓷纤维制品分类、性能特点及其在节能环保方面的优越性,总结了工业炉窑耐火内衬中纤维制品的广泛应用,分析了马钢使用纤维制品的现状,并建议加大应用力度和扩大使用领域。
2.
One example of industrial furnace was proved to explain the high performance of HiTAC technology.
并以实例对比说明某工业炉窑采用该技术前后的能量利用情况 ,从而阐述了该技术广阔的应用前
3.
The article mainly introduces the application of single-chip computer on the development of THL-1 Intelligent Controller of heat-accumulated reversing combustion system,and also describes the application of the controller on many kinds of industrial furnaces.
介绍采用单片机技术为蓄热式换向燃烧系统研制的THL - 1型智能控制仪 ,及其在多种工业炉窑上的应用。
6) industrial boiler
工业锅炉
1.
Measures to solve coal smoke pollution of industrial boiler;
工业锅炉煤烟型污染治理的根本措施
2.
Analysis and Measures of Energy-saving in the Industrial Boilers;
工业锅炉的节能分析与措施
3.
Experimental research on the influence of the shape of the fold smoke wall at the outlet of the combustion chamber to the dynamics filed of industrial boiler s hearth;
工业锅炉燃烧室出口折烟墙形状对炉内空气动力场影响的试验研究
补充资料：工业炉:工业炉排烟系统
利用烟囱或机械装置将工业炉炉膛内的烟气排出炉外的系统。保证排烟通畅是工业炉正常使用的重要条件﹐排烟不通畅时﹐炉膛压力昇高﹐从炉膛四周的缝隙会逸出大量烟气而增加炉子的热损失﹐影响炉内气流的均匀分布﹐降低炉温均匀性﹐恶化操作环境。
排烟系统是由產生抽力的排烟装置和排送烟气的烟道所组成。常用的排烟装置有烟囱(图1 烟囱排烟装置 
)﹑引风机或喷射管(图2 机械排烟装置 
)等。
烟囱排烟是靠流入烟囱内热烟气密度小於烟囱外空气密度所產生的浮力﹐以克服烟道的阻力。利用引风机也可将烟气排出﹐或在排烟系统中某一部位装设一个喷射管﹐用高速喷射气体所產生的负压排出烟气。烟囱排烟不消耗动力﹐排烟温度不受限制。当排烟阻力很大而工业炉又间断运行时﹐可用引风机或喷射管排烟。喷射管适用於排除高温烟气﹔引风机适用於排除低温烟气。
烟囱分为砖砌烟囱﹑混凝土烟囱和钢板烟囱。烟道有地下烟道和架空烟道两种。地下烟道多用砖砌﹐架空烟道宜採用衬有耐火材料的钢板製成。
为了减少烟气对环境的污染﹐或因节能需要而在烟道内设置预热器时﹐都需要儘量提高烟囱高度并增加烟囱出口处的烟气流速﹐使之大於当地最大风速或至少不低於3米/秒﹐以避免烟气中的有害气体和烟尘向地面扩散。当烟囱高度达50米以上时﹐烟囱顶部的风速为地面处风速的数倍。烟气到达地面时已在离烟囱很远的地方﹐这时烟气已在逐步扩散中稀释到无害的程度。对燃烧固体燃料的工业炉﹐在排烟系统中还要设置各种形式的除尘器﹐使烟气排出时的含尘浓度降低到200微克/米3以下。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条