1) the rate of output water
出水速率
1.
In this pa per consuming quantity of diols and the rate of output water were studied by the way of codistillation and one-step feeding.
用共沸蒸馏、一步投料的方法,对二元醇过量的质量及其出水速率进行了初步的研究。
2) dissolution rate
溶出速率
1.
Relationship between dissolution rate and bioavailability of paracetamol tablet;
对乙酰氨基酚片的溶出速率及生物利用度研究
2.
Study on the solid dispersion of rosiglitazone maleate and its dissolution rate;
马来酸罗格列酮固体分散体及其溶出速率
3.
Objective To prepare nifedipine solid dispersions and investigate their dissolution rate.
目的提高硝苯地平的体外溶出速率。
3) leaching rate
浸出速率
1.
Principle and analysis of oil leaching rate model;
油脂浸出速率数学模型的建模原理与分析
2.
The result indicated that the alumina leaching rate and temperature of reaction system both increase with microwave power, and the temperature of reaction system is not co.
研究了微波辐射加热条件下高炉铝酸钙渣的浸出过程·考察了微波辐射加热下,微波辐射功率、浸出用液的Na2OC质量浓度、液固比等对炉渣浸出反应的影响,并与传统加热浸出进行了比较·结果表明,氧化铝浸出率和反应体系的温度随着微波辐射功率的提高而增加·在温度未达到溶液沸点之前,反应体系为非恒温反应过程·微波辐射浸出与传统加热浸出相比较,微波辐射加热下炉渣中氧化铝浸出速率较传统加热方式浸出快得多,在氧化铝浸出率相同的前提下,微波浸出可降低浸出用液的Na2OC质量浓度,缩短浸出时间
4) speed of infusion
泡出速率
1.
The effects of freezing on the fermentation and speed of infusion of congou black tea was studied.
为了解冰冻对工夫红茶发酵及水浸出物泡出速率的影响,将鲜叶、萎凋叶在-17 ℃冰箱速冻2 h,然后解冻、揉捻、发酵、干燥制成工夫红茶。
5) dissolution
[英][,dɪsə'lu:ʃn] [美]['dɪsə'luʃən]
溶出速率
1.
The solubility and dissolution of the solid dispersion were measured.
方法 :采用溶剂熔融法制备氯化血红素固体分散物 ,用差示热量扫描 (DSC)图谱、红外光谱、X 射线衍射图谱的变化鉴定药物在载体中的分散特征 ;并对其溶解度和累积溶出速率进行考察。
2.
OBJECTIVE To improve the dissolution of albendazole preparation.
目的 提高阿苯达唑 (albendazole)的体外溶出速率。
3.
The crystalline forms of diflunisal were determined by X ray diffraction, and the effect of the crystalline forms on the in vitro dissolution of diflunisal from capsules was observed.
显示晶型二氟尼柳的胶囊剂溶出速率明显比非晶型的快 ,经 t检验具有显著性差异 (P<0 。
6) extrusion rate
挤出速率
1.
The applications of asisted extrusion technologies such as vibration extrusion,lubricating extrusion, gas-asisted extrusion in polymer extrusion were presented to overcome the deffects of low extrusion rate in normal extrusion.
针对聚合物常规挤出加工时挤出速率低的缺点,介绍振动挤出技术、润滑挤出技术、气体辅助挤出技术等辅助挤出技术在聚合物挤出加工中的应用。
补充资料：曹衣出水描
曹衣出水描 中国占代人物衣服褶纹画法之一。《图画见闻志》说曹仲达的人物画，衣服褶纹多用细笔紧束，似衣披薄纱，又如刚从水中冒出之感，后人因之命名。《点石斋丛画》：“用尖笔，其体重叠，衣褶紧穿，如蚯蚓描。”此法用笔最宜沉着。北宋陈用志，明丁云鹏、陈洪授等人作品，系基于此法之发展。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条