1) epoxy modified silicone resin
环氧改性有机硅树脂
2) silicone modified epoxy resin
有机硅改性环氧树脂
1.
In order to study the effect of laser parameters on the mass ablative rate of the carbon fiber reinforced silicone modified epoxy resin composite,laser irradiation experiments of the composite were carried out by a high power CO_2 laser with different laser parameters.
为了研究激光参数对碳纤维增强有机硅改性环氧树脂复合材料质量烧蚀率的影响规律,选用不同激光参数、采用高强度CO2激光器对该复合材料进行了激光辐照试验。
2.
The synthetic methods, properties, applications of silicon resin, linear polysiloxane, silicone modified epoxy resin were reviewed for the next phase of work, and a solid theoretical foundation.
本论文的研究主要分为四部分:第一部分对硅树脂、线型聚硅氧烷、有机硅改性环氧树脂的合成方法、性能研究、应用进行了综述,为开展研究奠定了理论基础。
3.
The results indicate that silicone modified epoxy resin has excellent performances because of their combined advantages and novel properties, and the compact coating was obtained with good adhesion,hardness and toughness.
采用数种有机硅氧烷合成了有机硅树脂,用有机硅树脂对环氧树脂进行化学改性,制得了有机硅改性环氧树脂。
3) silicone modified epoxy composite
有机硅改性环氧树脂复合材料
1.
Mechanical properties, thermal constants and ablative properties of a carbon fiber/silicone modified epoxy composite were studied.
介绍了一种碳纤维/有机硅改性环氧树脂复合材料的性能研究情况。
4) silicone modified phenolic epoxy resin
有机硅改性酚醛环氧树脂
1.
A silicone modified phenolic epoxy resin(SMPER) as sand control agent(SCA) is developed to solve severe sanding problems in oil wells in fine siltstone reservoirs of Shengli.
针对胜利油田出砂严重的细粉砂岩油藏的油井,研制了有机硅改性酚醛环氧树脂稳砂剂。
5) epoxy-silicone resin
环氧有机硅树脂
1.
Preparation and performance study of the coating of 4-fluorophenyl isocyanate monomer and nano-SiO_2 modified epoxy-silicone resin;
4-氟苯基异氰酸酯及纳米SiO_2改性环氧有机硅树脂涂层的制备及性能研究
6) organo-titanium modified epoxy resin
有机钛改性环氧树脂
补充资料：有机硅改性环氧树脂
分子式：
CAS号：
性质：电绝缘性能优异，介电强度103kV/mm(常态)，57kV/mm(受潮)，65kV/mm(200℃)；体积电阻率2×1016Ω·cm(常态)。涂在铜片上的漆膜200℃，168h老化不开裂，250℃，12h后热失重为4.15%，粘接强度2.1MPa。可由含烷氧基或羟基的低分子量聚硅氧烷与双酚基丙烷环氧树脂进行缩合反应来制取。用作H级电机、电器、变压器线圈浸渍漆，电缆接头和电子元件表面保护涂料。还可与玻璃布复合制成层压材料。
CAS号：
性质：电绝缘性能优异，介电强度103kV/mm(常态)，57kV/mm(受潮)，65kV/mm(200℃)；体积电阻率2×1016Ω·cm(常态)。涂在铜片上的漆膜200℃，168h老化不开裂，250℃，12h后热失重为4.15%，粘接强度2.1MPa。可由含烷氧基或羟基的低分子量聚硅氧烷与双酚基丙烷环氧树脂进行缩合反应来制取。用作H级电机、电器、变压器线圈浸渍漆，电缆接头和电子元件表面保护涂料。还可与玻璃布复合制成层压材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条