1) Sm_2O_3
Sm2O3
1.
Sm_2O_3 nanopowders are prepared by a novel sol-gel auto-combustion method,which is a low-temperature combustion synthesis procedure using sol-gel as precursors.
将溶胶-凝胶法(sol-gel)和低温燃烧技术(LCS)相结合,成功开发了一种以溶胶-凝胶为前驱体的燃烧合成Sm2O3纳米粉体的技术。
2.
Effect of V_2O_5/Sm_2O_3 modification on alumina performance for slurry phase dimethyl ether synthesis;
H2-TPR结果表明,在脱水催化剂γ-Al2O3、V2O5/γ-Al2O3和Sm2O3/γ-Al2O3上不出现还原峰,V2O5、Sm2O3的加入改善了复合催化剂中Cu的还原性能,促进了甲醇催化剂的还原。
2) Sm2O3 doped CeO2
Sm2O3掺杂CeO2
1.
Sm2O3 doped CeO2 powders were prepared by the coprecipitation-spray drying method with Sm(NO3)3·6H2O and Ce(NO3)3·6H2O as raw materials.
6H2O为原料,用共沉淀-喷雾干燥法制备了Sm2O3掺杂CeO2(SDC)粉体。
3) nano-Sm2O3
纳米Sm2O3
1.
The result showed that: nano-Sm2O3 didn t change the crystal structure of MC nylon, but changed the crystal lattice size of MC nylon;nano-Sm2O3 could obviously increase the mechanical properties of MC nylon,with the double result of strengthening and toughing MC nylon at the same time;the tensile strength, elongation at break, impact strength, flexural strength and flexu.
结果表明,纳米Sm2O3使MC尼龙晶格尺寸发生了一定程度的改变;纳米Sm2O3的加入可以明显改善MC尼龙的力学性能,对MC尼龙同时具有增强和增韧双重效果;MC尼龙/Sm2O3纳米复合材料的力学性能随着纳米Sm2O3用量的增加呈先升高后降低的趋势。
4) Sm2O3-doping
Sm2O3掺杂
1.
The influence of the concentration of Sm2O3-doping and temperature on the crystal phase,microstructure and electrical properties of the sample were investigated.
采用固相烧结工艺制备了高浓度Sm2O3掺杂的Bi4Ti3O12(BIT)基陶瓷材料。
5) CLST
CaO-Li2O-Sm2O3-TiO2(CLST)
6) BaO-Sm2O3-TiO2 system
BaO-Sm2O3-TiO2系统
补充资料：153Sm-radiopharmaceutical
分子式：
CAS号：
性质：153Sm是核医学诊断和治疗用较理想的核素，其半衰期为46.8h，辐射类型为β—(0.810,0.710和0.640MeV)和γ（103.2MeV）153Sm主要用于制备治疗用放射性药物。如153Sm-EDTMP（ethylene diamine tetramethylene phosphonic acid 乙二胺四亚甲基磷酸）有很高的亲肿瘤特性和亲骨性，已用于治疗骨转移癌，缓解骨疼痛，也可用于治疗原发性骨癌。
CAS号：
性质：153Sm是核医学诊断和治疗用较理想的核素，其半衰期为46.8h，辐射类型为β—(0.810,0.710和0.640MeV)和γ（103.2MeV）153Sm主要用于制备治疗用放射性药物。如153Sm-EDTMP（ethylene diamine tetramethylene phosphonic acid 乙二胺四亚甲基磷酸）有很高的亲肿瘤特性和亲骨性，已用于治疗骨转移癌，缓解骨疼痛，也可用于治疗原发性骨癌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条