1) thermal expansion coefficient
热胀系数
1.
The incremental equivalent inclusion model is proposed on the basis of the Eshelby inclusion method and Mori Tanaka method to investigate the effective thermal expansion coefficient and transformation strain coefficient of composites with SMA short fiber reinforcer.
讨论了SMA短纤维增强的铝基复合材料的热胀系数和相变应变系数 。
2.
Considering the difference of thermal expansion coefficient between carbon fiber sheet(CFS) and concrete,the equation about the thermal deformation due to solar radiation or sudden drop in temperature is established for concrete members with arbitrary cross-section strengthened by CFS.
考虑到碳纤维布(C FS)与混凝土的热胀系数不同,建立了CFS加固的任意形状横截面混凝土构件因日照辐射或骤然降温引起的温度自约束变形求解方程。
2) coefficient of thermal expansion
热胀系数
1.
The effect of dielectric constant, dielectric loss factor, coefficient of thermal expansion (CTE)and characteristic impedance of substrate materials on properties of MMB are mainly discussed.
介绍了微波多层板所用基材的性能参数,重点阐述了材料的介电常数、介质损耗、热胀系数、特性阻抗对多层板性能的影响。
3) Thermal expansion coefficient
热膨胀系数
1.
Reasons for inconsistency of material thermal expansion coefficient;
材料热膨胀系数非一致性的原因
2.
Research on major reasons affecting material thermal expansion coefficient;
影响材料热膨胀系数的主要因素
3.
Relationship between thermal expansion coefficient and composition of R_2O-MO-Al_2O_3-SiO_2 system glass;
R_2O-MO-Al_2O_3-SiO_2玻璃的组成与其热膨胀系数的关系
4) CTE
热膨胀系数
1.
A STUDY ON CTE OF NANO-INORGANIC HYBRIDED POLYIMIDE USING DSCM;
数字散斑相关方法测量聚酰亚胺无机纳米杂化材料的热膨胀系数
2.
Experimental Research on CTEs of SiO_2/PI Nanocomposites at Low Temperature;
纳米SiO_2/PI复合薄膜低温热膨胀系数的实验研究
3.
An Experimental Research on the CTE Measurement of Metal Composite Leads Using Laser Speckle Interferometry;
激光散斑干涉法测量金属复合引线热膨胀系数的实验研究
5) Coefficient of Thermal Expansion
热膨胀系数
1.
Research on measurement method of coefficient of thermal expansion of thin film at low temperature;
薄膜低温热膨胀系数测量方法研究
2.
Study of master body of material coefficient of thermal expansion;
标准样件的材料热膨胀系数
3.
Investigation on Coefficient of Thermal Expansion for Thermoplastic Polyimide;
热塑性聚酰亚胺的热膨胀系数研究
6) Thermal expansion
热膨胀系数
1.
It was revealed that cell parameter(a,c) and(Al—O) bond length(L_(Al—O)) of grain corundum were logarithm increase in the result of thermal expansion,but that of the whisker corundum were linearity increase.
利用高温XRD衍射数据,采用温度比较晶体化学研究方法,研究了不同晶形刚玉(-αAl2O3)的高温结构行为,结果表明:粒状刚玉的晶胞参数(a,c)、Al—O键键长LAl—O受热膨胀作用呈对数增大;晶须状刚玉则呈线性增大;粒状刚玉的晶格热膨胀系数(M)总体趋势呈对数增大,且增大趋势近乎一致,表现出各向同性;而晶须状呈线性增大,其晶胞参数(a)的热膨胀系数比晶胞参数(c)大,表现出各向异性。
2.
The glass forming regions were explored and the glass forming ability, thermal expansion, and water durability were investigated.
制备了MoO3-V2O5-P2O5-Fe2O3系磷酸盐玻璃,研究了玻璃形成能力、热膨胀系数和抗潮解等性能。
3.
The results demonstrate that the carbon fiber-reinforced can enhance the compressive strength and reduce the coefficient of thermal expansion of the industrial porcelain.
文章通过对纤维补强陶瓷的主要机械性能的实验研究 ,以及利用一套实验室已有的设备对材料的热膨胀系数的测定 ,认为工业陶瓷通过纤维补强等工艺手段 ,可有效地提高陶瓷的抗压强度和降低陶瓷的热膨胀系数 ,并从机理上找出这一现象产生的原
补充资料：负温度系数热敏电阻陶瓷(见热敏陶瓷)
负温度系数热敏电阻陶瓷(见热敏陶瓷)
thermo-sensitive ceramics with negative temperature coefficient
负温度系数热敏电阻陶瓷thermo一sensitiveeeramies with negative temperature eoeffieient在某一特定温度范围，电阻率随温度的升高而明显减小的热敏陶瓷。简称NTC陶瓷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条