1) stress softening
应力软化
1.
The stress softening effect and stress relaxation of montmorillonite, organomontmorillonite(OMMT), silica white and carbon black reinforced butadiene rubber (BR) vulcanizates were investigated.
研究了蒙脱土、有机蒙脱土、白炭黑及炭黑增强顺丁橡胶的应力软化效应和应力弛豫特性,用并联的Maxwell模型模拟了这些硫化胶的应力弛豫行为。
2.
The rheological characteristic, stress softening effect, stress relaxation and aging resistance of NaMAA reinforced EVM were investigated and compared with that of HAF reinforced EVM.
研究了NaMAA原位增强EVM的流变特性、应力软化和应力松弛以及老化前后的力学性能 ,并与炭黑 (N330 )增强的硫化胶进行对比。
3.
The stress relaxation and stress softening effects were also investigated.
另外 ,还研究了甲基丙烯酸镁补强丁腈橡胶的应力松弛及应力软化现
2) dynamic softening
动力软化效应
1.
The results show that the overall motions can result in dynamic softening in the flexible multi-body system.
应用Hamilton原理建立了轴对称匀速转动状态下对边简支对边自由矩形薄板的非线性动力学方程,采用假设模态法解析分析了板的前3阶近似振动频率、临界分岔值,表明整体运动可使柔性多体系统中的柔性构件产生动力软化效应;进一步采用假设模态法分析了板的后屈曲近似解,分别得到了从稳定平凡解失稳分岔形成的稳定的对称后屈曲解及其二次分岔产生的非对称后屈曲解,以及从不稳定平凡解分岔产生的不稳定的反对称后屈曲解。
3) softened stress strain relationship
软化应力-应变关系
1.
In this paper, based on equilibrium and compatibility conditions, as well as the softened stress strain relationship for concrete and elastic perfectly plastic stress strain relationship of mild reinforcing steel, the strength of reinforced concrete columns under combined axial, bending and shear forces was evaluated using the beam arch mechanism.
采用桁架－拱模型，利用平衡条件、协调条件和砼软化应力－应变关系以及钢筋的应力－应变关系，对钢筋砼框架短柱抗剪强度进行了分析，并利用该方法对国内所做６３个普通砼框架短柱的试验结果进行了强度分析，计算结果与试验结果符合较好。
4) stress-dropping softening model
应力跌落软化模型
5) stress-dropping strain-softening model
应力跌落软化模式
6) strain softening
应变软化
1.
Two-yield surface constitutive model for fine sand in consideration of dilatancy and strain softening;
考虑剪胀性和应变软化的粉细砂双屈服面本构模型
2.
Influence of liquid surface tension on the concrete fracture energy and its strain softening;
液体表面张力对混凝土断裂能及其应变软化的影响
3.
Analysis of cavity expansion in soil with shear dilationand strain softening considering large deformation;
应变软化及剪胀性土体中考虑大应变的孔扩张问题解析
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条