说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 退火孪晶
1)  annealing twin
退火孪晶
1.
The annealing twins occur in GH4199 alloy with electric field treatment and the number of twins increases w.
6%;合金经电场处理后产生退火孪晶,随处理时间的延长孪晶数量增加;孪晶的出现可以改变变形过程中显微裂纹的扩展方向,增加合金塑性变形功,推迟断裂时间,从而提高合金断裂延伸率;此外,电场处理提高了合金变形均匀性,亦能改善合金塑性。
2.
The results show that, most annealing twin microstruc- ture distribute in austenite matrix of annealed sample, and the deformation twin formed during tensile strain make the sample attain high strength and high plasticity.
结果表明,轧制后退火处理钢板的室温组织为奥氏体基体中存在大量的退火孪晶,在拉伸变形中形成的形变孪晶使产品获得了高强度、高塑性。
2)  annealing twins
退火孪晶
1.
The results show that the fracture mechanism of the sheets is typical toughness fracture under the condition of tensile failure,and the microstructure is austenitic with a large number of annealing twins before tension.
实验结果表明钢板拉伸时发生典型的延性断裂;拉伸前的组织为伴有大量退火孪晶的奥氏体;在拉伸过程中退火孪晶转变成形变孪晶,使产品的强度和塑性提高;退火过程中形成的织构组分有利于塑性变形。
2.
The results show that the annealing twins and the massive fault are found after annealing, moreover with the ascensionof temperature, the grain size, annealing twins quantity and the fault density increase also.
结果表明:退火后有退火孪晶和大量的层错存在,而且随温度的升高,晶粒尺寸变大、孪晶的数量和层错密度也随晶粒尺寸的增加而增大;此外孪晶移动到边界处会受到阻碍,形成非共格的孪晶界面。
3)  annealing twin boundary fracture facet
退火孪晶界断面
4)  annealing crystallization
退火晶化
1.
Comparing with annealing crystallization,many cha racteristics in the shock wave crystallization can not be explained using diffus ion theory.
与退火晶化比较 ,激波晶化具有一系列鲜明特征 ,这些特征是固态下扩散性相变理论难以解释的 ,有深刻的物理内涵。
5)  Crystal annealing
晶体退火
6)  annealing twin
退火双晶
补充资料:孪晶界


孪晶界
dary twin bour

  孪晶界twin boundary一种特殊的晶界。孪上的原子正好座落在相邻两晶粒的晶格位置上。由界上没有显著的原子错排,这种晶界是共格晶界,界能要比一般晶界的低得多。 最常见的共格晶界即为共格孪晶界,界面两侧的位向满足反映对称关系,反映面即称为孪生面。给出不同晶体结构的孪生面。 晶体的孪生面界晶晶曰拍于其昆体友中四一仪晶体结构孪生面面心立方 {111}体心立方 {112}密集六角{1’0I2}LBC么△‘BC昆体 面心立方晶体中的{111}面是按ABC ABCZ的次序堆垛起来的,应用堆垛符号表示,即△△△△△△。如果从某一层起堆垛层序颠倒过来变成;ABA CBA CB或△△△△甲甲甲甲,上下两部分就形成了孪晶关系(见图)。可以看出,所有原子“孪生面上)的第一近邻的数目和距离都和完整晶体相有改变的只是孪晶界面上的第二近邻的关系,它们2心立方的ABC型转化为密积六角的BAB型。 如果孪生的第一个丈括水面扮同师面心立方晶体的孪生关系面没有穿过整个晶体,少就是一个肖克利不全位相当于共格孪晶界的一,阶,称为孪生位错。 孪晶可以在形变过才产生,称为机械孪晶;注能在晶体生长过程或退止程中产生,称为生长孪健退火孪晶。(吴希俊猎得栋治冲呵挝域)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条