1) horizontal pneumatic conveying
水平气力输送
1.
Numerical study of effect of particle properties on particle phase volume fraction in a horizontal pneumatic conveying pipe;
颗粒物性对水平气力输送管中颗粒浓度分布影响的数值模拟
2) pneumatic conveying
气力输送
1.
Flow characteristics and Shannon entropy analysis of dense-phase pneumatic conveying of pulverized coal under high pressure;
高压浓相粉煤气力输送特性及信息熵分析
2.
Investigation on characteristics of pulverized coal dense-phase pneumatic conveying under high pressure;
煤粉高压密相气力输送特性
3.
Flow characteristics and Shannon entropy analysis of dense-phase pneumatic conveying under high pressure;
高压浓相粉煤气力输送特性及信息熵分析(英文)
3) pneumatic transmission
气力输送
1.
Application of double-pipe long-distance pneumatic transmission technology;
双套管长距离气力输送技术的应用
2.
Factors analysis on fragmentation ratio of carbon black during pneumatic transmission;
炭黑在气力输送过程中破碎率的影响因素分析
3.
The expediency for choice of pneumatic transmission equipment & lower energy was gave.
介绍了一种食品生产过程中颗粒状物气力输送过程中压力损失计算的方法 ,该方法具有简捷、易懂、准确等特点 ,为生产过程中气力输送机械的选择和降低能耗提供了方
4) pneumatic conveyance
气力输送
1.
Design of hot nitrogen pneumatic conveyance system for bottle-grade PET;
瓶级聚酯热氮气力输送系统的设计
2.
On-line monitoring of pneumatic conveyance of particulate solids;
粉料气力输送状态在线监测装置研究
3.
On-line monitoring for pulverized coal pneumatic conveyance
锅炉煤粉气力输送状态在线监测系统研究
5) pneumatic transportation
气力输送
1.
From the practical design of a pneumatic transportation system in catalyst unit,the process data and property parameters used as the base in design were indicated.
通过一套微球装置气力输送系统设计实例,简要说明了设计依据的工艺及物性参数,详细阐述了工艺流程选择和主要设计参数的确定以及输送管道的计算过程。
2.
A detailed description was made to the general working principle of powder materials pneumatic transportation, working characteristics of Y95 model fluctuating low pressure pneumatic conveyer, Y91C model whirling pneumatic conveyer, and S-series of pneumatic transportation system commonly used in foundry shops.
详细介绍了粉料气力输送的一般工作原理及铸造车间常用的Y95沸腾式低压气力输送装置、Y91C涡流式气力输送装置和S系列气力输送系统的工作特点。
3.
The pneumatic transportation system for paper-scraps associated with MARITNI production line for paperback books was designed for Beijing Xinhua Printing House.
总结了印刷厂气力输送和除尘系统的性质特点、任务以及设计技术上的探讨和经验体会。
6) pneumatic transport
气力输送
1.
A new kind of pneumatic transporter for continuous stock feeding;
一种新型连续供料气力输送装置
2.
Industrial experimental research on dense-phase fluidized techniques of pneumatic transport;
密相流态化气力输送技术的工业试验研究
3.
This paper introduced a new pneumatic transport unit with continuous material supply,i.
介绍了一种能连续供料的新型气力输送系统———三仓泵的设计思路和其各仓结构参数的设计方案,试验结果表明,该方案正确、合理。
补充资料：脉冲式气力输送
分子式：
CAS号：
性质：是高压、低速及密相的气力输送装置。可降低能耗，减少物料破碎和管道的磨损。适合输送黏性的粉状及粗糙的粒状物料。一般密相输送速度为7～15m/s左右，脉冲密相输送速度为1m/s或更低的速度。由发送器、粒位器、气刀及控制盘等构成。气刀将压缩空气间歇脉冲地通入输送管道，并把发送器排出的物料柱分割成间断料栓，借料栓前后的静压差，推动物料向前输送。
CAS号：
性质：是高压、低速及密相的气力输送装置。可降低能耗，减少物料破碎和管道的磨损。适合输送黏性的粉状及粗糙的粒状物料。一般密相输送速度为7～15m/s左右，脉冲密相输送速度为1m/s或更低的速度。由发送器、粒位器、气刀及控制盘等构成。气刀将压缩空气间歇脉冲地通入输送管道，并把发送器排出的物料柱分割成间断料栓，借料栓前后的静压差，推动物料向前输送。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条