1) molten iron torpedo pot
铁水鱼雷罐
1.
The the use and managing experiences of 260t molten iron torpedo pot in the Ironmaking Plant of Tianjin Iron & Steel Co,.
对天津钢铁有限公司炼铁厂使用260t铁水鱼雷罐的生产管理主要经验进行总结,通过抓好铁水鱼雷罐的日常运行管理、特殊运行情况的操作、专业技术维护管理,使铁水鱼雷罐炉衬侵蚀处在受控范围内,延长寿命,确保了安全生产。
2) torpedo ladle
鱼雷罐
1.
By analyzing the problems existed in the cross use of 65 t hot-metal ladle and 320 t torpedo ladle in Jinan Iron & Steel Corporation, measurements on improving the working condition of transportation and maintenance are put forward and the good effect is obtained.
针对济钢65t铁水罐和320t鱼雷罐的交叉使用中存在的问题进行分析,提出了改进铁水罐的运输、维护工况的措施,取得了较好的效果。
2.
According to the process status of Jigang, three fashions of feeding molten iron for converter by torpedo ladle, by mixer furnace and by iron ladle are compared with, and then torpedo ladle as a fashion of feeding molten iron converter is.
结合济钢的工艺状况对鱼雷罐进铁、混铁炉进铁、铁水罐直接进铁方式进行了比较,认为选取鱼雷罐进铁方式比较合理。
3) Torpedo
[英][tɔ:'pi:dəʊ] [美][tɔr'pido]
鱼雷罐
1.
Optimization of the powder injecting pretreatment process in torpedo;
鱼雷罐喷粉预处理优化研究
2.
The analysis of the powder injecting pretreatment process in torpedo by water-modeling;
鱼雷罐喷粉预处理过程水模研究
3.
Simulation on transport dynamics of hot metal dephosphorization pretreatment by powder injection in torpedo(Ⅰ):study on the mixing time and powder-penetration ratio;
鱼雷罐喷粉预处理传输动力学物理模拟(Ⅰ):均混时间和粉剂穿透比研究
4) torpedo car
鱼雷罐车
1.
In order to improve temperature management of hot metal and reduce temperature drop of hot metal being transported by torpedo car, an on line model for the prediction of hot metal temperature during transportation is developed.
为了提高铁水温度管理水平 ,降低鱼雷罐车输送铁水过程中的温降 ,开发了铁水输送过程中的在线温度预测模型。
2.
In this article,a general comparison among three kinds of desulphurization methods (torpedo car desulphurization,hot metal ladle co-injection desulphurization) is made according to technical characteristics,equipment maintenance,treatment cost and investment.
通过对比鱼雷罐车脱硫、铁水包共吹脱硫和单吹颗粒镁脱硫三种方法的工艺技术、操作与维护性能、生产成本和工程投资 ,阐述了铁水包单吹颗粒镁脱硫技术在保持共吹脱硫法的先进性和合理性的同时 ,解决了其存在的不足 ,是一种代表铁水深脱硫发展趋势的新型脱硫技
3.
It is an Important Task in ferrous metallurgy that is studied on reliability and heat preservation of torpedo car.
鱼雷罐车是炼铁生产中必不可少的设备之一,其造价昂贵。
5) Torpedo car
鱼雷罐
1.
Research on application of fuzzy-PID in baking temperature control of torpedo car;
Fuzzy-PID控制在鱼雷罐烘烤温度控制中的应用研究
2.
A mathematical model has been developed to simulate temperature drop of hot metal in torpedo car during transportation.
为了分析铁水在输送过程中的温降 ,开发了鱼雷罐中铁水温降数学模型。
3.
Through test analyzing,the physical and chemical properties of the slag brick for torpedo car of different manufactory in Shougang group iron-making plant was contrasted.
本文通过检测、分析、比较首钢本部炼铁厂用不同厂家鱼雷罐渣线砖的理化性能,分析了不同供货商产品的差异和对首钢炼铁生产条件的适应性,提出改进鱼雷罐渣线砖的几点看法。
6) torpedo cars
鱼雷罐
1.
Considering that the bricks of torpedo cars cannot satisfy the requirements of the Plant,a lot of research work is developed to improve service life of the bricks.
通过回顾首钢炼铁厂近几年来鱼雷罐内衬的使用情况,分析了鱼雷罐内衬使用寿命下降的初步原因。
2.
Basing on contrasting the test results,it proposes some useful suggestions to improve the service life of torpedo cars.
本文首先对首钢炼铁厂鱼雷罐渣线砖使用情况进行了介绍,然后对各厂家供应的渣线砖的理化性能进行了检验分析。
补充资料：英“旗鱼”鱼雷
国别：英国
类型：
编号:
武器名称：英“旗鱼”鱼雷
英“旗鱼”鱼雷。英国海军在二次大战结束前鱼雷技术已处于领先地位，其间研制的mk8热动力鱼雷至今还在使用。 1982年英阿马岛海战中英海军潜艇“征服者”号使用mk8鱼雷一举击沉阿根廷海军巡洋舰“贝尔拉诺将军”号。
二次世界大战后英国鱼雷发展走了不少弯路，尤其是1954年发生了过氧化氢鱼雷炸沉英国潜艇事故，迫使英海军放弃了热动力鱼雷研制工作。直到1959年改变了研制方向，开始了mk24大型电动鱼雷方案研制，经过20年才完成mk24-0型鱼雷。以后经改进研制成mk24-2型鱼雷，即“虎鱼”鱼雷，已服役。1987年为对付前苏联的新型潜艇，又完成“旗鱼”大型鱼雷的研制，也已交付海军使用。“旗鱼”鱼雷，是热动力鱼雷，长度5.94米，航速最大达70.5节，低速航程40公里，装药249千克， 鱼雷总重1850千克。此雷是目前世界上航速最高、重量最大的鱼雷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条