1) abrasion resistant paper
耐磨纸
1.
The quality requirements and production process control of abrasion resistant paper, decorativefilm,backing film and HDF for laminate flooring production are outlined.
介绍强化木地板生产的耐磨纸、装饰纸、平衡纸、高密度纤维板的质量要求和生产工艺控制。
2) wear-resistant paper
表层耐磨纸
1.
Manufacturing technologies of and market demands for wear-resistant paper on laminated flooring;
表层耐磨纸的生产技术及市场需求
3) wear-resistant
耐磨
1.
Application of wear-resistant and lubricating coating for wood cutting tools;
润滑耐磨功能涂料在木工刀具上的应用
2.
The wear-resistant material with best composition and overlay welding process were successfully developed,and the productiviting and the economic benefit were obviously improved.
通过对碎煤齿环的失效分析 ,找出了影响齿环寿命的因素及薄弱环节 ,并研制成功了最优成分的耐磨材料和堆焊工艺 ,显著提高了生产率和企业的经济效
4) wear-resistance
耐磨
1.
Application on new nitriding coating technology of tube's corrosion-resistanceand wear-resistance;
油管耐磨抗蚀氮化新工艺与应用
2.
Study of wear-resistance of chemical plating on the surface of 65Mn steel;
65Mn钢表面化学镀耐磨研究
3.
So we have to improve the wear-resistance of the rotor by hard anodic oxidation.
在纺纱过程中,转杯处于高速旋转状态,纤维的摩擦、负压气流的冲刷以及部分杂质的侵蚀和人为的清洁工作,均能造成转杯内壁和凝棉槽表面的磨损,因此为提高转杯的耐磨性须对其进行硬质阳极氧化处理。
5) wear-resisting
耐磨
1.
Study on Oxide-alumine Porcelain of Low-temperature Wear-resisting Ueing High-alumina Clay;
利用高铝矾土研制低温耐磨氧化铝瓷
2.
Welding of wear-resisting steel Hardox400;
Hardox400耐磨钢的焊接
6) abrasion resistance
耐磨
1.
Testing results showed that the coat was excellent in abrasion resistance, stain resistance and slip resistance.
结果表明涂层在耐磨、耐污和防滑性方面表现优异。
2.
Comparing with ordinary rubber sole, PU sole is light in weight with better abrasion resistance.
聚氨酯鞋底与普通橡胶鞋底相比,它具有质量轻、耐磨性能好等特点。
3.
In this article through the inspection of imported cyclone separators, the author discussed the examining methods of cyclones, analyzed the mechanics of abrasion resistance and cracking of the hard surfacing.
通过对进口旋风分离器的检验 ,探讨了旋风分离器的检验方法 ,对表面硬化层耐磨和开裂的机理进行了一些探讨 ,为了研究旋风分离器堆焊层表面裂纹的扩展情况 ,制作了裂纹对比试块 ,利用端点回波法测量了堆焊层裂纹自身高度 ,为利用超声波探伤仪测量裂纹深度提供了有效方
补充资料：晒图纸,重氮盐正像晒图纸
分子式：
CAS号：
性质：又称晒图纸，重氮盐正像晒图纸(diazo erect image blueprint paper)或重氮感光纸(diazo sensitized paper)。以蓝图原纸作纸基，再把感光剂涂布于原纸上而制成的一种加工纸。为卷筒纸。原纸要求具有良好的湿抗张强度和吸收性能，湿变形极小，且不含影响感光材料性能的化学药品，通常用棉浆或漂白木浆在造纸机上抄造而成。合格的原纸制成的蓝图纸具有纸面平整、感光层涂布均匀。无白点、斑点、药渍、皱纹等。耐折度不小于33～50次，卷曲度小于15mm。将重氮盐和偶联剂等化学药剂涂布在原纸上加工而成。干法显影用氨气熏蒸，湿法显影则用显影液显影后干燥而成。显像后，图形有蓝色线条、紫色线条或黑色线条的，背底为浅色或白色。用于工程图、文件等的复制。
CAS号：
性质：又称晒图纸，重氮盐正像晒图纸(diazo erect image blueprint paper)或重氮感光纸(diazo sensitized paper)。以蓝图原纸作纸基，再把感光剂涂布于原纸上而制成的一种加工纸。为卷筒纸。原纸要求具有良好的湿抗张强度和吸收性能，湿变形极小，且不含影响感光材料性能的化学药品，通常用棉浆或漂白木浆在造纸机上抄造而成。合格的原纸制成的蓝图纸具有纸面平整、感光层涂布均匀。无白点、斑点、药渍、皱纹等。耐折度不小于33～50次，卷曲度小于15mm。将重氮盐和偶联剂等化学药剂涂布在原纸上加工而成。干法显影用氨气熏蒸，湿法显影则用显影液显影后干燥而成。显像后，图形有蓝色线条、紫色线条或黑色线条的，背底为浅色或白色。用于工程图、文件等的复制。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条