1) YL112 aluminum alloy
YL112铝合金
1.
Microstructure and Mechanical Properties of Rheo-Die Casting YL112 Aluminum Alloy;
流变压铸YL112铝合金的组织和力学性能
2.
Microstructures characteristics of YL112 aluminum alloy produced by rheo-diecasting process;
流变压铸YL112铝合金的微观组织特征
3.
The numerical simulations of mold filling and solidification process for the YL112 aluminum alloy were done by the supposed mathematical model.
简要介绍充型凝固过程数值模拟的实际意义,分析了充型凝固过程数值模拟的特点,利用建立的数学模型对YL112铝合金压铸件进行了模拟。
2) YL112 die casting aluminum alloy
YL112压铸铝合金
1.
On the basis of Semi-solid isothermal heat treatment, the semisolid Compression Deformation Behavior of the non-dendritic structure slurry of YL112 die casting aluminum alloy, which is prepared under the condition of 570 ℃×.
基于半固态等温热处理 ,以 5 70℃× 12 0min条件下制备出的YL112压铸铝合金非枝晶组织坯料为研究对象 ,对其在不同变形速率和变形温度下的半固态压缩变形特性进行了研究。
3) aluminium alloys / Al Si alloy
铝合金/铝硅合金
4) aluminum and aluminum alloy
铝及铝合金
1.
Microstructure and strength of aluminum and aluminum alloy joint brazed with rapidly-cooled Al-Si-Cu-Zn filler metals;
Al-Si-Cu-Zn急冷钎料钎焊铝及铝合金的界面结构及强度
2.
Green bright dipping process for aluminum and aluminum alloy;
铝及铝合金环保出光工艺
3.
Study on the process of electroless Ni-P alloys plating on aluminum and aluminum alloy;
铝及铝合金化学镀Ni-P合金工艺研究
5) Aluminium and Aluminium alloy
铝及铝合金
1.
Determination of Fe, Cu, Si, Mn, Mg, Cr,Zn, Ti and Ga Elements in Aluminium and Aluminium Alloy on Import & Export;
进出口铝及铝合金中Fe、Cu、Si、Mn、Mg、Cr、Zn、Ti、Ga等元素的测定
2.
Chromating technology of aluminium and aluminium alloy are introduced.
对铝及铝合金的铬酸盐转化膜工艺作了介绍,论述了铬酸盐转化膜工艺的日常管理及注意事项。
3.
The EDTA-H 2O 2 specteophotometry method can determined iron in the aluminium and aluminium alloy.
在pH≥ 10 2的氨性介质中 ,Fe(Ⅲ )与EDTA及H2 O2 形成稳定的紫红色三元配合物 ,铁量在 0～ 0 0 6mg/ml范围内符合比耳定律 ,可用于铝及铝合金中铁的测
6) aluminum and its alloys
铝及铝合金
1.
An environmentally acceptable chemical conversion agent CF-5 was formulated from non-toxic titanium salt, zirconium slat, and organic polymer so as to replace the conventional toxic chromium(Ⅵ) passivation agent used for aluminum and its alloys.
开发了一种由无毒的钛盐、锆盐和有机聚合物组成的铝及铝合金化学转化剂CF-5,以取代有毒的六价铬钝化。
2.
The development of zincation for aluminum and its alloys, from using s imple concentrated solution to dilute solution, finally to multi-metal and cyanide s olution, is described in detail.
较详细地阐述了铝及铝合金浸锌工艺 ,从单纯的浸浓溶液到稀溶液 ,再到多元合金的浸锌溶液及无氰浸锌溶液的发展过程 ,分析了浸锌工艺的优点与缺点 ,及防止浸锌工艺引出的特殊腐蚀问题的措施 ,对浸锌机理进行了初步探索。
3.
This paper described the recently progress on surface treatment of aluminum and its alloys.
本文简要介绍了目前铝及铝合金表面处理技术的进展。
补充资料：N-(Thien-2-yl-methoxy)phthalimide
分子式 C13H11NO2S
分子量 259.29
CAS号 39685-80-8
N-(2-噻吩甲氧基)邻苯二甲酰亚胺为无色针状结晶。熔点129～131℃,不溶于水和冷的甲醇、乙醇,溶于二甲基亚砜。H-NMR,δ(DMSO-d??ppm);5,42(CH2),7.10,7.32,7.72(噻吩上的三个H),7.92(苯环上的4个H) 。
用途;N-(2-噻吩甲氧基)邻苯二甲酰亚胺为新型青霉素和头孢菌素(Cephalosporin)的中间体。
分子量 259.29
CAS号 39685-80-8
N-(2-噻吩甲氧基)邻苯二甲酰亚胺为无色针状结晶。熔点129～131℃,不溶于水和冷的甲醇、乙醇,溶于二甲基亚砜。H-NMR,δ(DMSO-d??ppm);5,42(CH2),7.10,7.32,7.72(噻吩上的三个H),7.92(苯环上的4个H) 。
用途;N-(2-噻吩甲氧基)邻苯二甲酰亚胺为新型青霉素和头孢菌素(Cephalosporin)的中间体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条